Scholarlink

<p>This study presents a comparative investigation of the electrochemical performance of platinum (Pt) and palladium (Pd)-based electrodes, fabricated via spray coating and electrodeposition techniques on porous nickel foam substrates, for supercapacitor applications. The electrodes were systematically evaluated using cyclic voltammetry (CV), galvanostatic charge–discharge (GCD), specific capacitance analysis, Ragone plot interpretation, and long-term cycling stability tests. CV results revealed that Pt electrodes exhibited wider responses compared to Pd counterparts and the electrodes prepared by using spraying showed better current responses compared to electrodeposited electrodes. The specific capacitance values reach to about 100&#xa0;F/g at around 0.50&#xa0;A/g for all electrodes. The energy and power densities for the electrodes between 0.01 and 0.50&#xa0;A/g current density ranged from 0.1 to 30 Wh/kg and 10 to 20,000&#xa0;W/kg, respectively. Furthermore, cycling tests up to 4800 cycles demonstrated a consistent increase in capacitance retention for all samples where the sprayed electrodes reached higher values (~%120) when compared with the electrodeposited electrodes. In device form, the supercapacitors prepared by the spray coated electrodes showed better performance than the supercapacitors with electrodeposited electrodes.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Comparison of electrochemical deposition and spray methods for Pt and Pd-coated electrodes on porous nickel foam

  • 期刊论文

  • 发表日期：

    2026年1月15日

查看全文
  • İsmet Işgör,
  • Sibel Eken Korkut,
  • Fatih Can Sarı,
  • Ali Gelir,
  • Önder Yargı

摘要

This study presents a comparative investigation of the electrochemical performance of platinum (Pt) and palladium (Pd)-based electrodes, fabricated via spray coating and electrodeposition techniques on porous nickel foam substrates, for supercapacitor applications. The electrodes were systematically evaluated using cyclic voltammetry (CV), galvanostatic charge–discharge (GCD), specific capacitance analysis, Ragone plot interpretation, and long-term cycling stability tests. CV results revealed that Pt electrodes exhibited wider responses compared to Pd counterparts and the electrodes prepared by using spraying showed better current responses compared to electrodeposited electrodes. The specific capacitance values reach to about 100 F/g at around 0.50 A/g for all electrodes. The energy and power densities for the electrodes between 0.01 and 0.50 A/g current density ranged from 0.1 to 30 Wh/kg and 10 to 20,000 W/kg, respectively. Furthermore, cycling tests up to 4800 cycles demonstrated a consistent increase in capacitance retention for all samples where the sprayed electrodes reached higher values (~%120) when compared with the electrodeposited electrodes. In device form, the supercapacitors prepared by the spray coated electrodes showed better performance than the supercapacitors with electrodeposited electrodes.