Scholarlink

<p>This report demonstrates the synergistic enhancement in intrinsic electrochemical performance of a novel nanocomposite, copper oxide/barium oxide (CuO/BaO), for supercapacitor applications. The CuO/BaO nanocomposite was synthesized via a simple one-step wet chemical route. Its crystalline structure, surface morphological features, compositional confirmation, and particle size distribution were examined using powder XRD, SEM, EDAX, elemental mapping, TEM, and SAED pattern analyses. Electrochemical measurements were performed in a three-electrode system using 3&#xa0;M KOH electrolyte, with the CuO/BaO nanocomposite coated on Ni foam as the working electrode. Cyclic voltammetry (CV) and galvanostatic charge–discharge (GCD) studies evidenced an enhanced electrochemical performance of the synthesized nanocomposite over its counterparts. Electrochemical impedance spectroscopy (EIS) confirmed reduced internal and charge transfer resistances, indicating enhanced conductivity. GCD-derived specific capacitance of the CuO/BaO nanocomposite was found to be 1392.2 F/g at a current density of 0.6 A/g. Owing to its high-specific capacitance, simple synthesis procedure, and cost-effectiveness, the CuO/BaO nanocomposite is proposed as a promising electrode material for supercapacitor applications.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Enhanced pseudocapacitive performance of wet-chemically synthesized novel CuO/BaO nanocomposite

  • 期刊论文

  • 发表日期：

    2025年9月24日

查看全文
  • B. Dhanalakshmi,
  • G. Suresh,
  • Suganya Josephine G.A.,
  • B. Padmadevi

摘要

This report demonstrates the synergistic enhancement in intrinsic electrochemical performance of a novel nanocomposite, copper oxide/barium oxide (CuO/BaO), for supercapacitor applications. The CuO/BaO nanocomposite was synthesized via a simple one-step wet chemical route. Its crystalline structure, surface morphological features, compositional confirmation, and particle size distribution were examined using powder XRD, SEM, EDAX, elemental mapping, TEM, and SAED pattern analyses. Electrochemical measurements were performed in a three-electrode system using 3 M KOH electrolyte, with the CuO/BaO nanocomposite coated on Ni foam as the working electrode. Cyclic voltammetry (CV) and galvanostatic charge–discharge (GCD) studies evidenced an enhanced electrochemical performance of the synthesized nanocomposite over its counterparts. Electrochemical impedance spectroscopy (EIS) confirmed reduced internal and charge transfer resistances, indicating enhanced conductivity. GCD-derived specific capacitance of the CuO/BaO nanocomposite was found to be 1392.2 F/g at a current density of 0.6 A/g. Owing to its high-specific capacitance, simple synthesis procedure, and cost-effectiveness, the CuO/BaO nanocomposite is proposed as a promising electrode material for supercapacitor applications.