Scholarlink

<p>Polymer electrolyte films composed of PVP and PVP/glycerin with varying concentrations of CuCl<sub>2</sub> (10, 20, and 30 wt.%) were synthesized using the solution casting method. The synthesized electrolyte films were characterized using FTIR, XRD, UV–Vis, DSC, and TGA techniques. FTIR spectroscopy revealed an O–H stretching vibration of PVP around 3300&#xa0;cm⁻<sup>1</sup>, which experienced broadening and a reduction in intensity upon the introduction of glycerin and CuCl<sub>2</sub>. XRD analysis displayed a characteristic peak at 2θ ~ 20°, with the peak shifting towards higher angles and a slight decrease in intensity as the CuCl<sub>2</sub> concentration increased, indicating a disruption of the crystalline structure of the host matrix. UV–Vis analysis revealed that the optical bandgap of pure PVP was 3.6&#xa0;eV, whereas the incorporation of 10, 20, and 30 wt.% CuCl<sub>2</sub> into the PVP/glycerin system resulted in a significant reduction of the bandgap to 2.4, 1.7, and 1.4&#xa0;eV, respectively. DSC measurements indicated a decrease in the glass transition temperature (<i>T</i><sub>g</sub>) from 150&#xa0;°C for pure PVP to 146, 144, and 140&#xa0;°C for the PVP/glycerin composites containing 10, 20, and 30% CuCl<sub>2</sub>, respectively. TGA results indicated enhanced thermal stability for PVP/glycerin with CuCl<sub>2</sub>, which remained stable up to 225&#xa0;°C, compared to pure PVP. According to conductivity measurements, the highest ionic conductivity achieved for a system containing 20 wt.% CuCl<sub>2</sub> is 6.47 × 10⁻<sup>4</sup> S/cm at room temperature. The experimental data suggest that these optimized electrolyte materials could be suitable candidates for high-performance energy storage technologies.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Investigating the structural, optical, and thermal behavior of CuCl2 incorporated PVP/glycerin-based polymer electrolytes for energy storage applications

  • 期刊论文

  • 发表日期：

    2025年6月11日

查看全文
  • Aseel A. Kareem,
  • Ali Adil Abbas,
  • Hussein Kh. Rasheed,
  • Anji Reddy Polu,
  • Yosef Jazaa,
  • Thamer Alomayri

摘要

Polymer electrolyte films composed of PVP and PVP/glycerin with varying concentrations of CuCl2 (10, 20, and 30 wt.%) were synthesized using the solution casting method. The synthesized electrolyte films were characterized using FTIR, XRD, UV–Vis, DSC, and TGA techniques. FTIR spectroscopy revealed an O–H stretching vibration of PVP around 3300 cm⁻1, which experienced broadening and a reduction in intensity upon the introduction of glycerin and CuCl2. XRD analysis displayed a characteristic peak at 2θ ~ 20°, with the peak shifting towards higher angles and a slight decrease in intensity as the CuCl2 concentration increased, indicating a disruption of the crystalline structure of the host matrix. UV–Vis analysis revealed that the optical bandgap of pure PVP was 3.6 eV, whereas the incorporation of 10, 20, and 30 wt.% CuCl2 into the PVP/glycerin system resulted in a significant reduction of the bandgap to 2.4, 1.7, and 1.4 eV, respectively. DSC measurements indicated a decrease in the glass transition temperature (Tg) from 150 °C for pure PVP to 146, 144, and 140 °C for the PVP/glycerin composites containing 10, 20, and 30% CuCl2, respectively. TGA results indicated enhanced thermal stability for PVP/glycerin with CuCl2, which remained stable up to 225 °C, compared to pure PVP. According to conductivity measurements, the highest ionic conductivity achieved for a system containing 20 wt.% CuCl2 is 6.47 × 10⁻4 S/cm at room temperature. The experimental data suggest that these optimized electrolyte materials could be suitable candidates for high-performance energy storage technologies.