Scholarlink

Purpose <p>Strain quantifies myocardial deformation. Despite its high diagnostic value, strain analyses using cardiovascular magnetic resonance (CMR) feature tracking (FT) have not been fully implemented into clinical routine due to lack of information on reproducibility. The purpose of this study was to assess the comparability of cardiovascular magnetic resonance CMR FT strain and ejection fraction (EF) measurements, obtained from different MR scanners and analyzed using different software platforms.</p> Methods <p>CMR examinations were performed in 15 healthy volunteers using three different scanners (German Heart Center of the Charité, Charité Campus Berlin Buch, and Theresien-Hospital Mannheim). FT was performed using Medis Suite and Circle CVI. Inter-software/scanner agreement was determined using Bland–Altman plots, Wilcoxon test, and paired Student’s t test. Intra-/inter-observer reproducibility was evaluated using intraclass correlation coefficients.</p> Results <p>Left ventricular (LV) global longitudinal (GLS) and circumferential (GCS) strain did not differ between the three centers (small bias of − 1.27 to 1.32% for GLS and 0.91 to 0.69% for GCS). Inter-scanner agreement was lower regarding LV global radial strain (GRS) (bias of − 2.29 to 4.53%) and good for LV EF (bias of − 0.59 to 0.94%). Inter-software agreement was low for GLS (bias of − 5.72 to − 4.59%), GCS (− 1.13 to − 1.55%), and GRS (18.34 to 19.83%), with higher GLS/GCS and lower GRS values in CVI than Medis. LV EF showed better inter-software agreement (biases of − 0.07 to 0.06%). Intra- and inter-observer reproducibility was good for strain measurements across all scanners (bias of − 0.01 to 2.05 and 0.22 to 1.92, respectively) and software packages (ICC 0.70 to 0.90 and 0.51 to 0.89, respectively).</p> Conclusion <p>Inter-scanner reproducibility for CMR FT measurements was high for GLS and GCS, suggesting potential use in routine CMR examinations. However, strain values between the two software vendors (CVI and Medis) were significantly different, indicating the need for standardization and implementation of software-specific cutoff values.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

A multicenter study on the comparability of myocardial strain values acquired with different CMR scanners and analyzed with different post-processing software: insights into the “Traveling Volunteers” study

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年8月30日

查看全文
  • Collin Goetze,
  • Wensu Chen,
  • Patrick Doeblin,
  • Aylin Demir,
  • Stephanie Wiesemann,
  • Jochen Hansmann,
  • Volkmar Falk,
  • Jeanette Schulz-Menger,
  • Jennifer Erley,
  • Sebastian Kelle

摘要

Purpose

Strain quantifies myocardial deformation. Despite its high diagnostic value, strain analyses using cardiovascular magnetic resonance (CMR) feature tracking (FT) have not been fully implemented into clinical routine due to lack of information on reproducibility. The purpose of this study was to assess the comparability of cardiovascular magnetic resonance CMR FT strain and ejection fraction (EF) measurements, obtained from different MR scanners and analyzed using different software platforms.

Methods

CMR examinations were performed in 15 healthy volunteers using three different scanners (German Heart Center of the Charité, Charité Campus Berlin Buch, and Theresien-Hospital Mannheim). FT was performed using Medis Suite and Circle CVI. Inter-software/scanner agreement was determined using Bland–Altman plots, Wilcoxon test, and paired Student’s t test. Intra-/inter-observer reproducibility was evaluated using intraclass correlation coefficients.

Results

Left ventricular (LV) global longitudinal (GLS) and circumferential (GCS) strain did not differ between the three centers (small bias of − 1.27 to 1.32% for GLS and 0.91 to 0.69% for GCS). Inter-scanner agreement was lower regarding LV global radial strain (GRS) (bias of − 2.29 to 4.53%) and good for LV EF (bias of − 0.59 to 0.94%). Inter-software agreement was low for GLS (bias of − 5.72 to − 4.59%), GCS (− 1.13 to − 1.55%), and GRS (18.34 to 19.83%), with higher GLS/GCS and lower GRS values in CVI than Medis. LV EF showed better inter-software agreement (biases of − 0.07 to 0.06%). Intra- and inter-observer reproducibility was good for strain measurements across all scanners (bias of − 0.01 to 2.05 and 0.22 to 1.92, respectively) and software packages (ICC 0.70 to 0.90 and 0.51 to 0.89, respectively).

Conclusion

Inter-scanner reproducibility for CMR FT measurements was high for GLS and GCS, suggesting potential use in routine CMR examinations. However, strain values between the two software vendors (CVI and Medis) were significantly different, indicating the need for standardization and implementation of software-specific cutoff values.