Scholarlink

<p>High-performance thick electrodes are regarded as a feasible strategy for enhancing the energy density of lithium-ion batteries. However, fast ion transport and long-life cyclability in thick cathode remain significant challenges. Here, we developed a multidirectional-ion-transport Ni-rich thick cathode LiNi<sub>0.8</sub>Co<sub>0.1</sub>Mn<sub>0.1</sub>O<sub>2</sub> (NCM811), which exhibits excellent consecutive layer-by-layer contact and fast ion-flow diffusion, achieving high areal capacity and superior rate capability toward 3D-printed batteries. By balancing the viscosity of electrode inks and mechanical strength of thick electrodes, a multilayer NCM811 cathode with strong interfacial bonding, reaching an electrode thickness of 3 mm and ultra-high mass loading of 185 mg cm<sup>−2</sup>, delivers a record areal capacity of 38.4 mAh cm<sup>−2</sup> up to date. The 3D-printed porous frameworks featuring the multidirectional transport of Li ion and superior affinity of electrolyte, exceptionally boost active material utilization and fast electrochemical kinetics of thick electrodes, resulting in a high specific capacity of 208 mAh g<sup>−1</sup>. Furthermore, the printed electrode has a capacity retention rate of 88% after 150 cycles at 2 C. A full cell assembled with a printed NCM811 cathode and graphite anode shows high energy density of 417 Wh kg<sup>−1</sup> at electrode level and long-term cyclability. This work provides an effective strategy for fabricating longlifespan and high-energy-density lithium-ion batteries.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Consecutive 3D-printed layered cathodes with anisotropic ion transport networks for ultrahigh-areal-capacity lithium-ion batteries

  • 期刊论文

  • 发表日期：

    2025年8月25日

查看全文
  • Mingtong Zhang,
  • Kaichen Bo,
  • Jiaxin Ma,
  • Yinghua Fu,
  • Sen Wang,
  • Zhengdong Ma,
  • Yuxin Ma,
  • Shihao Liao,
  • Tongle Chen,
  • Chenyang Li,
  • Xiao Wang,
  • Shaoxu Wang,
  • Zhong-Shuai Wu

摘要

High-performance thick electrodes are regarded as a feasible strategy for enhancing the energy density of lithium-ion batteries. However, fast ion transport and long-life cyclability in thick cathode remain significant challenges. Here, we developed a multidirectional-ion-transport Ni-rich thick cathode LiNi0.8Co0.1Mn0.1O2 (NCM811), which exhibits excellent consecutive layer-by-layer contact and fast ion-flow diffusion, achieving high areal capacity and superior rate capability toward 3D-printed batteries. By balancing the viscosity of electrode inks and mechanical strength of thick electrodes, a multilayer NCM811 cathode with strong interfacial bonding, reaching an electrode thickness of 3 mm and ultra-high mass loading of 185 mg cm−2, delivers a record areal capacity of 38.4 mAh cm−2 up to date. The 3D-printed porous frameworks featuring the multidirectional transport of Li ion and superior affinity of electrolyte, exceptionally boost active material utilization and fast electrochemical kinetics of thick electrodes, resulting in a high specific capacity of 208 mAh g−1. Furthermore, the printed electrode has a capacity retention rate of 88% after 150 cycles at 2 C. A full cell assembled with a printed NCM811 cathode and graphite anode shows high energy density of 417 Wh kg−1 at electrode level and long-term cyclability. This work provides an effective strategy for fabricating longlifespan and high-energy-density lithium-ion batteries.