Scholarlink

<p>Microplastics (MPs) enter sewage treatment plants (STPs) primarily through domestic wastewater, yet their removal is often incomplete and strongly influenced by treatment processes, making these facilities important pathways for MP release into the environment. This study quantifies MP concentrations, characteristics, and evaluates removal efficiencies across all treatment units of three STPs in Malaysia employing extended aeration (STP-1), a sequencing batch reactor (STP-2), and a mechanized oxidation ditch system (STP-3). Across facilities, influent MP concentrations varied significantly between plants and sampling methods (Kruskal–Wallis test, <i>p</i> &lt; 0.05), with volume-reduced samples, yielding higher values: 10.33 ± 1.53, 10.24 ± 3.86, and 5.67 ± 3.29 MPs/L in STP-1, STP-2, and STP-3, respectively. Effluent concentrations were uniformly low, ranging from 0.06 ± 0.02–0.13 ± 0.13 MPs/L (STP-1), 0.01 ± 0.01–0.08 ± 0.14 MPs/L (STP-2), and 0.03 ± 0.02–0.21 ± 0.07 MPs/L (STP-3), with no significant differences among plants (Kruskal–Wallis test, <i>p</i> &gt; 0.05), indicating comparable overall performance. Removal efficiencies were highest in STP-2 (99.07–99.92%), followed by STP-1 (97.06–99.42%) and STP-3 (92.49–99.53%), underscoring the influence of treatment technology. Fibers, fragments, and foams were the dominant MP shapes, while polymers such as polypropylene, acrylonitrile butadiene styrene, low-density polyethylene, styrene acrylonitrile, polyethylene terephthalate, high-impact polystyrene, high-density polyethylene, water-soluble polyurethane, and polystyrene reflected diverse community‑level plastic usage. Catchment characteristics influenced MP concentration, morphology, and polymer distribution, whereas sampling methodology exerted strong and systematic effects on all measured parameters, with volume-reduced sampling consistently capturing higher concentrations and greater shape and polymer diversity.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Influence of Treatment Technology and Sampling Methodology on Microplastic Abundance and Characteristics: A Comparative Study of Three Sewage Treatment Plants in Penang, Malaysia

  • 期刊论文

  • 发表日期：

    2026年3月31日

查看全文
  • Ishmail Sheriff,
  • Nik Azimatolakma Awang,
  • Herni Binti Halim

摘要

Microplastics (MPs) enter sewage treatment plants (STPs) primarily through domestic wastewater, yet their removal is often incomplete and strongly influenced by treatment processes, making these facilities important pathways for MP release into the environment. This study quantifies MP concentrations, characteristics, and evaluates removal efficiencies across all treatment units of three STPs in Malaysia employing extended aeration (STP-1), a sequencing batch reactor (STP-2), and a mechanized oxidation ditch system (STP-3). Across facilities, influent MP concentrations varied significantly between plants and sampling methods (Kruskal–Wallis test, p < 0.05), with volume-reduced samples, yielding higher values: 10.33 ± 1.53, 10.24 ± 3.86, and 5.67 ± 3.29 MPs/L in STP-1, STP-2, and STP-3, respectively. Effluent concentrations were uniformly low, ranging from 0.06 ± 0.02–0.13 ± 0.13 MPs/L (STP-1), 0.01 ± 0.01–0.08 ± 0.14 MPs/L (STP-2), and 0.03 ± 0.02–0.21 ± 0.07 MPs/L (STP-3), with no significant differences among plants (Kruskal–Wallis test, p > 0.05), indicating comparable overall performance. Removal efficiencies were highest in STP-2 (99.07–99.92%), followed by STP-1 (97.06–99.42%) and STP-3 (92.49–99.53%), underscoring the influence of treatment technology. Fibers, fragments, and foams were the dominant MP shapes, while polymers such as polypropylene, acrylonitrile butadiene styrene, low-density polyethylene, styrene acrylonitrile, polyethylene terephthalate, high-impact polystyrene, high-density polyethylene, water-soluble polyurethane, and polystyrene reflected diverse community‑level plastic usage. Catchment characteristics influenced MP concentration, morphology, and polymer distribution, whereas sampling methodology exerted strong and systematic effects on all measured parameters, with volume-reduced sampling consistently capturing higher concentrations and greater shape and polymer diversity.