<p>Bioelectrokinetic remediation integrates electrokinetic and bioremediation processes to enhance the removal of pollutants from the soil. This study evaluates the efficiency of bioelectrokinetic remediation in treating loam soils contaminated with vegetable oil, mineral oil, and diesel at a concentration of 20,000&#xa0;mg/kg under low-voltage conditions (0.11&#xa0;V/cm), aiming to maintain microbial activity while minimizing drastic pH fluctuations near the electrodes. A 14-day microcosm experiment was conducted, monitoring physicochemical parameters (pH, moisture content, contaminant distribution) and biological responses (heterotrophic aerobic bacteria, contaminant-degrading bacteria, fungi, and microbial enzymatic activity). The results demonstrated significant contaminant migration towards the anode for all three pollutants. Vegetable oil contamination showed degradation rates (average zones of 22.06%, central zone of 62.29% related to control), attributed to electromigration and increased microbial population and activity. A similar effect was noticed for diesel biodegradation (average zones of 15.23%, central zone of 64.50% related to control). In contrast, mineral oil exhibited no degradation and enhanced microbial activity, with a 29.89% reduction in the central zone related to the control, attributed exclusively to migration of pollutant to the anode. These findings lay the groundwork for developing optimized remediation strategies that maximize contaminant removal while preserving microbial activity, contributing to the advancement of sustainable soil restoration strategies.</p>

错误:搜索内容不能为空,请输入英文关键词
错误:关键词超出字数限制,请精简
高级检索

Bioelectrokinetic approach for remediating loam soil contaminated with vegetable oil, mineral oil, and diesel

  • Debora Conde Molina,
  • Mauricio Rizzardi,
  • Vanina Di Gregorio

摘要

Bioelectrokinetic remediation integrates electrokinetic and bioremediation processes to enhance the removal of pollutants from the soil. This study evaluates the efficiency of bioelectrokinetic remediation in treating loam soils contaminated with vegetable oil, mineral oil, and diesel at a concentration of 20,000 mg/kg under low-voltage conditions (0.11 V/cm), aiming to maintain microbial activity while minimizing drastic pH fluctuations near the electrodes. A 14-day microcosm experiment was conducted, monitoring physicochemical parameters (pH, moisture content, contaminant distribution) and biological responses (heterotrophic aerobic bacteria, contaminant-degrading bacteria, fungi, and microbial enzymatic activity). The results demonstrated significant contaminant migration towards the anode for all three pollutants. Vegetable oil contamination showed degradation rates (average zones of 22.06%, central zone of 62.29% related to control), attributed to electromigration and increased microbial population and activity. A similar effect was noticed for diesel biodegradation (average zones of 15.23%, central zone of 64.50% related to control). In contrast, mineral oil exhibited no degradation and enhanced microbial activity, with a 29.89% reduction in the central zone related to the control, attributed exclusively to migration of pollutant to the anode. These findings lay the groundwork for developing optimized remediation strategies that maximize contaminant removal while preserving microbial activity, contributing to the advancement of sustainable soil restoration strategies.