Scholarlink

<p>The adoption of carbon capture, utilization, and storage (CCUS) technology is increasingly prevalent, driven by the global initiative to conserve energy and reduce emissions. Nevertheless, CCUS has the potential to induce corrosion in equipment, particularly in high-pressure environments containing carbon dioxide (CO<sub>2</sub>). Therefore, anti-corrosion protection is necessary for the metal utilized for CO<sub>2</sub> production and storage equipment. Herein, an ionic liquid (triethylsulfonium bis-trifluoromethylsulfonyl-imide) was used to functionalize graphene oxide (prepared via the improved Hummers method). Field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) confirmed ionic liquids (IL) were successfully attached to the graphene oxide (GO) lattice. Afterwards, 0.5 wt% and 1 wt% IL-GO composites were separately incorporated into the epoxy and coated on the carbon steel substrate with a thickness of 50 ± 2&#xa0;µm. The surface examinations demonstrated a consistent distribution of the ILGO composite in the epoxy matrix and achieved a uniform surface. The anti-corrosive properties of 0.5 wt% and 1 wt% IL-GO/epoxy coatings were evaluated using electrochemical tests such as potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) after immersion in the CO<sub>2</sub> (1.5&#xa0;MPa) and 3.5 wt% sodium chloride (NaCl) systems. After 48&#xa0;h of immersion in a corrosion environment (CO<sub>2</sub>-NaCl), the protection efficiency of 0.5 wt% and 1 wt% IL-GO/epoxy coatings is 86.41 ± 0.55 and 92.59 ± 0.83 (%), respectively. The findings of this study demonstrated that the ILGO composite-reinforced epoxy coating exhibited exceptional corrosion resistance when exposed to CO<sub>2</sub>.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Anticorrosion properties of ionic liquid functionalized graphene oxide epoxy composite coating on the carbon steel for CCUS environment

  • 期刊论文

  • 发表日期：

    2025年1月29日

查看全文
  • Nikhil Rahul Dhongde,
  • Sayani Adhikari,
  • Prasanna Venkatesh Rajaraman

摘要

The adoption of carbon capture, utilization, and storage (CCUS) technology is increasingly prevalent, driven by the global initiative to conserve energy and reduce emissions. Nevertheless, CCUS has the potential to induce corrosion in equipment, particularly in high-pressure environments containing carbon dioxide (CO2). Therefore, anti-corrosion protection is necessary for the metal utilized for CO2 production and storage equipment. Herein, an ionic liquid (triethylsulfonium bis-trifluoromethylsulfonyl-imide) was used to functionalize graphene oxide (prepared via the improved Hummers method). Field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) confirmed ionic liquids (IL) were successfully attached to the graphene oxide (GO) lattice. Afterwards, 0.5 wt% and 1 wt% IL-GO composites were separately incorporated into the epoxy and coated on the carbon steel substrate with a thickness of 50 ± 2 µm. The surface examinations demonstrated a consistent distribution of the ILGO composite in the epoxy matrix and achieved a uniform surface. The anti-corrosive properties of 0.5 wt% and 1 wt% IL-GO/epoxy coatings were evaluated using electrochemical tests such as potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) after immersion in the CO2 (1.5 MPa) and 3.5 wt% sodium chloride (NaCl) systems. After 48 h of immersion in a corrosion environment (CO2-NaCl), the protection efficiency of 0.5 wt% and 1 wt% IL-GO/epoxy coatings is 86.41 ± 0.55 and 92.59 ± 0.83 (%), respectively. The findings of this study demonstrated that the ILGO composite-reinforced epoxy coating exhibited exceptional corrosion resistance when exposed to CO2.