Utilization of organic waste from Chinar leaves as sustainable and eco-friendly adsorbent for fluoride removal

Due to concerns about high water fluoride concentrations and their detrimental consequences on health, particularly dental and skeletal fluorosis, dependable and cost-effective defluoridation techniques are needed. Chinar leaves (Platanus orientalis), a common waste, might be utilized for the production of activated carbon. For Chinar leaf activated carbon (CLAC) manufacturing, two pre-pyrolysis chemical modification procedures were used: acidic HCl (H-activation) and alkaline NaOH (OH-activation). The success of fluoride removal suggests further research and implementation in locations with fluoride-related water quality issues. This study examines how CLAC dosage, fluoride concentration, temperature, pH, and contact exposure effect defluoridation efficiency. The pseudo-second-order non-linear kinetic model and Freundlich non-linear isotherm model with R² = 0.99 fit the data, resulting in a peak adsorption capacity of 30.3 mg/g for 0.3 g CLAC. In the present work, the adsorption mechanism was regulated by more than intraparticle diffusion. Adsorption occurred spontaneously as exothermic monolayer chemisorption, according to thermodynamic studies. Adsorbent activated with HCl (H-activated) showed promising results, with 73% F⁻ removal efficiency for OH-activated and 91% for H-activated CLAC.