Characterization on Fracture Toughness of Cermet Coating Coupling Instrumented Indentation and X‑Ray Computed Tomography

The surface brittle fracture of cermet coating seriously restricts its application. Accurate evaluation of the fracture toughness of cermet coating is a prerequisite for improving its life.

This paper aims to propose an accurate characterization method for fracture toughness of cermet coating.

By coupling instrumented indentation and X‑ray computed tomography (XCT), the indentation-induced fracture behaviors under various loads within WC-12%Co coatings were studied. The three-dimensional subsurface crack morphologies and the damage evolution within the coating were nondestructively observed by XCT. The indentation response was correlated with the damage evolution. The impact of substrate effects on indentation-induced fracture behaviors was further studied using finite element analysis (FEA).

The Palmqvist shape of the indentation crack under low loads was successfully identified. The first pop-in event in the load-displacement (P-h) curve was determined to be triggered by bottom cracking, marking the onset of the multiple fracture mode. Laugier’s equation offered a stable and reliable estimation of fracture toughness for the coating in the radial cracking mode.

XCT plays a crucial role in selecting the appropriate equation for indentation toughness calculation. The critical indentation depth for the first pop-in was suggested as the threshold for reliably extracting intrinsic fracture toughness of cermet coatings. Numerical results revealed a constant linear relationship between the critical depth and coating thickness, and a high sensitivity of the critical depth to yield stress of the substrate. The proposed analytical procedure holds potential for generalization to diverse cermet coatings on metal substrates.