Scholarlink

<p>In this study, a cost-effective and environmentally friendly solid-phase extraction (SPE) method using walnut shell-immobilised on Amberlite XAD-4 (WNS-XAD-4) was developed to pre-concentrate and determine Cu(II) and Cd(II) ions in water samples prior to flame atomic absorption analysis (FAAS). The low-cost adsorbent, prepared by immobilizing waste walnut shells on Amberlite XAD-4 (WNS-XAD-4), was characterized using Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), Thermal Gravimetric Analysis (TGA), and Brunauer–Emmett–Teller (BET) analysis. Under optimal conditions, the method achieved recoveries of 95.7% for Cu(II) and 100% for Cd(II) using 5.0&#xa0;mL of 1.5&#xa0;mol L<sup>−1</sup> HNO<sub>3</sub> as eluent. The detection limits were found as 0.582&#xa0;μg L<sup>−1</sup> for Cu(II) and 0.03&#xa0;μg L<sup>−1</sup> for Cd(II) with preconcentration factors of 10 and 40, respectively. The accuracy of the method was validated using the certified aquatic plant reference material BCR-670 and successfully applied to various real water samples, including those from Lake Van, Billoris Spa, tap water, salt water and wastewater from Siirt, Turkey.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Cost-Effective Removal of Cu(II) and Cd(II) from Wastewater Using Walnut Shell-Immobilized Amberlite XAD-4 as a Sorbent

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年5月19日

查看全文
  • İbrahim Teğin,
  • Selma Akdeniz,
  • Gurbet Canpolat,
  • Orhan Acar

摘要

In this study, a cost-effective and environmentally friendly solid-phase extraction (SPE) method using walnut shell-immobilised on Amberlite XAD-4 (WNS-XAD-4) was developed to pre-concentrate and determine Cu(II) and Cd(II) ions in water samples prior to flame atomic absorption analysis (FAAS). The low-cost adsorbent, prepared by immobilizing waste walnut shells on Amberlite XAD-4 (WNS-XAD-4), was characterized using Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), Thermal Gravimetric Analysis (TGA), and Brunauer–Emmett–Teller (BET) analysis. Under optimal conditions, the method achieved recoveries of 95.7% for Cu(II) and 100% for Cd(II) using 5.0 mL of 1.5 mol L−1 HNO3 as eluent. The detection limits were found as 0.582 μg L−1 for Cu(II) and 0.03 μg L−1 for Cd(II) with preconcentration factors of 10 and 40, respectively. The accuracy of the method was validated using the certified aquatic plant reference material BCR-670 and successfully applied to various real water samples, including those from Lake Van, Billoris Spa, tap water, salt water and wastewater from Siirt, Turkey.