Scholarlink

<p>This study investigated the adsorption performance of LaFeO<sub>3</sub>/g-C<sub>3</sub>N<sub>4</sub> (LFO/g-CN) composite material for the removal of Orange G (OG) dye from aqueous solutions. The LFO/g-CN composite, prepared by wet impregnation method from LFO phase and g-CN compound, was characterized using various techniques including Fourier Transform Infrared Spectroscopy (FTIR), Thermogravimetric Analysis (TGA), and Brunauer–Emmett–Teller (BET) surface area analysis. BET results revealed a significant increase in surface area from 3.7 m<sup>2</sup> g<sup>−1</sup> for LFO to 51 m<sup>2</sup> g<sup>−1</sup> for the LFO/g-CN composite. The adsorption efficiency was optimized by examining different factors affecting the adsorption process including adsorbent amount, initial pH, solution temperature, contact time and initial OG dye concentration. The maximum removal percentage of OG onto LFO/g-CN material was found to be 72% at pH 2 and 55&#xa0;°C, using an adsorbent amount of 150&#xa0;mg and initial OG dye concentration of 10&#xa0;mg L<sup>−1</sup> during a contact time of 180&#xa0;min. The pseudo-second Order (PSO) kinetic and Langmuir isotherm models accurately described the adsorption of OG on the LFO/g-CN composite. Thermodynamic analysis confirms that the adsorption process is spontaneous (<InlineEquation ID="IEq1"> <InlineMediaObject> <ImageObject Color="BlackWhite" FileRef="11144_2025_2870_Article_IEq1.gif" Format="GIF" Height="14" Rendition="HTML" Resolution="72" Type="Linedraw" Width="36" /> </InlineMediaObject> <EquationSource Format="TEX">\(\Delta {G}^{\circ }\hspace{0.17em}\)</EquationSource> <EquationSource Format="MATHML"><math> <mrow> <mi mathvariant="normal">Δ</mi> <msup> <mrow> <mi>G</mi> </mrow> <mo>∘</mo> </msup> <mspace width="1.69998pt" /> </mrow> </math></EquationSource> </InlineEquation>&lt; 0) and endothermic (<InlineEquation ID="IEq2"> <InlineMediaObject> <ImageObject Color="BlackWhite" FileRef="11144_2025_2870_Article_IEq2.gif" Format="GIF" Height="15" Rendition="HTML" Resolution="72" Type="Linedraw" Width="38" /> </InlineMediaObject> <EquationSource Format="TEX">\({\Delta H}^{\circ }\)</EquationSource> <EquationSource Format="MATHML"><math> <msup> <mrow> <mi mathvariant="normal">Δ</mi> <mi>H</mi> </mrow> <mo>∘</mo> </msup> </math></EquationSource> </InlineEquation> &gt; 0). This information contributes to a better understanding of LFO/g-CN as an efficient adsorbent for dye removal, offering potential applications in wastewater treatment at elevated temperatures.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Synthesis of lanthanum ferrite/graphitic carbon nitride (LaFeO3/g-C3N4) composite for the efficient removal of Orange G dye from aqueous solutions

  • 期刊论文

  • 发表日期：

    2025年6月3日

查看全文
  • Naziha Chakour,
  • Hinane Baleh,
  • Salah Bassaid,
  • Abdelkader Dehbi,
  • Nadir Oueld hamadouche,
  • Giovanna Colucci,
  • Francesca Stefania Freyria,
  • Barbara Bonelli,
  • Ali Alsalme,
  • Massimo Messori

摘要

This study investigated the adsorption performance of LaFeO3/g-C3N4 (LFO/g-CN) composite material for the removal of Orange G (OG) dye from aqueous solutions. The LFO/g-CN composite, prepared by wet impregnation method from LFO phase and g-CN compound, was characterized using various techniques including Fourier Transform Infrared Spectroscopy (FTIR), Thermogravimetric Analysis (TGA), and Brunauer–Emmett–Teller (BET) surface area analysis. BET results revealed a significant increase in surface area from 3.7 m2 g−1 for LFO to 51 m2 g−1 for the LFO/g-CN composite. The adsorption efficiency was optimized by examining different factors affecting the adsorption process including adsorbent amount, initial pH, solution temperature, contact time and initial OG dye concentration. The maximum removal percentage of OG onto LFO/g-CN material was found to be 72% at pH 2 and 55 °C, using an adsorbent amount of 150 mg and initial OG dye concentration of 10 mg L−1 during a contact time of 180 min. The pseudo-second Order (PSO) kinetic and Langmuir isotherm models accurately described the adsorption of OG on the LFO/g-CN composite. Thermodynamic analysis confirms that the adsorption process is spontaneous ( \(\Delta {G}^{\circ }\hspace{0.17em}\) Δ G ∘ < 0) and endothermic ( \({\Delta H}^{\circ }\) Δ H ∘  > 0). This information contributes to a better understanding of LFO/g-CN as an efficient adsorbent for dye removal, offering potential applications in wastewater treatment at elevated temperatures.