Scholarlink

<p>A relative humidity (RH) sensor based on a V4C3 MXene-coated etched single-mode optical fiber is experimentally demonstrated. We fabricated and tested RH sensors with four different diameters of 15, 16, 17, and 18&#xa0;μm for the optimization of etching thickness in terms of hysteresis. It was shown that the RH sensor with a 17&#xa0;μm diameter delivered the most repeatable performance with the lowest hysteresis during both RH rising and falling processes. The operating RH range for the sensor was from 30 to 80%. The sensor demonstrated fast response and recovery times of 0.125&#xa0;s and 0.386&#xa0;s, respectively, suggesting its potential for real-time breath monitoring.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

A relative humidity sensor based on V4C3 MXene-coated etched optical fiber

  • 期刊论文

  • 发表日期：

    2025年4月26日

查看全文
  • Janghyun Ryu,
  • Taeho Woo,
  • Jeehwan Kim,
  • Jungje Jo,
  • Namwook Joe,
  • Suh-young Kwon,
  • Chao-Kuei Lee,
  • Ju Han Lee

摘要

A relative humidity (RH) sensor based on a V4C3 MXene-coated etched single-mode optical fiber is experimentally demonstrated. We fabricated and tested RH sensors with four different diameters of 15, 16, 17, and 18 μm for the optimization of etching thickness in terms of hysteresis. It was shown that the RH sensor with a 17 μm diameter delivered the most repeatable performance with the lowest hysteresis during both RH rising and falling processes. The operating RH range for the sensor was from 30 to 80%. The sensor demonstrated fast response and recovery times of 0.125 s and 0.386 s, respectively, suggesting its potential for real-time breath monitoring.