Scholarlink

<p>This paper presents a numerical simulation using ANSYS Fluent to investigate the performance of two water desalination systems under identical conditions. Realistic environmental conditions such as ambient pressure, temperature, fluid inlet velocity, and temperature of the fluid entering the tank and the heat source (both being water) were considered. Both models were tested under the same conditions: a pressure of 1&#xa0;atm, an ambient temperature of 27&#xa0;°C, an inlet fluid velocity in the tank of 0.08&#xa0;m/s, an inlet fluid temperature to the tank of 27&#xa0;°C, an inlet fluid velocity to the heat source of 0.01&#xa0;m/s, and an inlet fluid temperature to the heat source of 67&#xa0;°C. The tank and heat source were made of aluminum and copper, respectively. The obtained results showed significant differences and will be discussed in detail in the following sections.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

CFD simulation and performance comparison of two distillation tank designs with different heat source geometries

  • 期刊论文

  • 发表日期：

    2025年7月17日

查看全文
  • Omid Shariati,
  • Hadi SamimiAkhjahani

摘要

This paper presents a numerical simulation using ANSYS Fluent to investigate the performance of two water desalination systems under identical conditions. Realistic environmental conditions such as ambient pressure, temperature, fluid inlet velocity, and temperature of the fluid entering the tank and the heat source (both being water) were considered. Both models were tested under the same conditions: a pressure of 1 atm, an ambient temperature of 27 °C, an inlet fluid velocity in the tank of 0.08 m/s, an inlet fluid temperature to the tank of 27 °C, an inlet fluid velocity to the heat source of 0.01 m/s, and an inlet fluid temperature to the heat source of 67 °C. The tank and heat source were made of aluminum and copper, respectively. The obtained results showed significant differences and will be discussed in detail in the following sections.