Scholarlink

<p>A rapid method has been developed for determining ultra-low level Pu isotopes in atmospheric particulate matter samples using SF-ICP-MS and TEVA resin. The Pu purification, ashing conditions and microwave digestion, were optimized to achieve high decontamination factor of U (4.1 × 10<sup>4</sup>) and stably high Pu recovery (80–90%). The method detection limits were estimated to be 0.83&#xa0;fg/g for <sup>239</sup>Pu and 0.70&#xa0;fg/g for <sup>240</sup>Pu. Four IAEA certified reference materials were used for method evaluation. Finally, the method was successfully applied to determine the source of Pu in atmospheric particulate matter samples. The method can be performed within 16&#xa0;h.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

A rapid method for determination of ultra-trace level Pu isotopes in atmospheric particulate matter samples using SF-ICP-MS and TEVA resin

  • 期刊论文

  • 发表日期：

    2025年5月17日

查看全文
  • Futao Xin,
  • Min Luo,
  • Chun Li,
  • Lingling Ma,
  • Diandou Xu,
  • Gang Xu,
  • Xi Li,
  • Yang Shao

摘要

A rapid method has been developed for determining ultra-low level Pu isotopes in atmospheric particulate matter samples using SF-ICP-MS and TEVA resin. The Pu purification, ashing conditions and microwave digestion, were optimized to achieve high decontamination factor of U (4.1 × 104) and stably high Pu recovery (80–90%). The method detection limits were estimated to be 0.83 fg/g for 239Pu and 0.70 fg/g for 240Pu. Four IAEA certified reference materials were used for method evaluation. Finally, the method was successfully applied to determine the source of Pu in atmospheric particulate matter samples. The method can be performed within 16 h.