<p>In the field of aqueous metal ion removal, conventional metal ion extraction methods often face limitations such as low separation efficiency and leaching of extractants, leading to secondary environmental contamination. This study used the Pickering emulsion templating method, with gelatin/sodium alginate complexes as stabilizing particles, to fabricate a Pickering emulsion hydrogel (PEHG) loaded with the zinc extractant di-(2-ethylhexyl) phosphoric acid (P204). The resulting hydrogel system not only improves emulsion stability but also effectively sequesters Zn<sup>2</sup>⁺ ions from aqueous solutions. The structure of the materials was characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). The influence of pH, adsorbent dosage, initial zinc concentration, and contact time on adsorption capacity was investigated by the study. Results showed that at pH 4, the PEHG exhibited a maximum adsorption capacity of 13.47&#xa0;mg&#xa0;g⁻<sup>1</sup> for Zn<sup>2</sup>⁺. The adsorption behavior follows pseudo-second-order kinetics and fits the Langmuir–Freundlich isotherm, suggesting a chemisorption-dominated mechanism. This corresponds to monolayer adsorption of a single solute from dilute solution onto heterogeneous surfaces. The adsorbent retains over 80% removal efficiency through five regeneration cycles, demonstrating excellent reusability. This study establishes a theoretical framework for preparing extractant-incorporated Pickering emulsion hydrogel microspheres using gelatin/sodium alginate composites. We developed an environmentally friendly and cost-effective adsorbent for heavy metal ions.</p>

错误:搜索内容不能为空,请输入英文关键词
错误:关键词超出字数限制,请精简
高级检索

Preparation of extractant-containing pickering emulsion hydrogel from gelatin/sodium alginate composite materials for Zn2+ adsorption

  • AiWei Fu,
  • Yaodong Liang,
  • Yongjun He

摘要

In the field of aqueous metal ion removal, conventional metal ion extraction methods often face limitations such as low separation efficiency and leaching of extractants, leading to secondary environmental contamination. This study used the Pickering emulsion templating method, with gelatin/sodium alginate complexes as stabilizing particles, to fabricate a Pickering emulsion hydrogel (PEHG) loaded with the zinc extractant di-(2-ethylhexyl) phosphoric acid (P204). The resulting hydrogel system not only improves emulsion stability but also effectively sequesters Zn2⁺ ions from aqueous solutions. The structure of the materials was characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). The influence of pH, adsorbent dosage, initial zinc concentration, and contact time on adsorption capacity was investigated by the study. Results showed that at pH 4, the PEHG exhibited a maximum adsorption capacity of 13.47 mg g⁻1 for Zn2⁺. The adsorption behavior follows pseudo-second-order kinetics and fits the Langmuir–Freundlich isotherm, suggesting a chemisorption-dominated mechanism. This corresponds to monolayer adsorption of a single solute from dilute solution onto heterogeneous surfaces. The adsorbent retains over 80% removal efficiency through five regeneration cycles, demonstrating excellent reusability. This study establishes a theoretical framework for preparing extractant-incorporated Pickering emulsion hydrogel microspheres using gelatin/sodium alginate composites. We developed an environmentally friendly and cost-effective adsorbent for heavy metal ions.