Scholarlink

<p>A new well controllable vinyl silane grafted styrene butadiene rubber (SBR) was firstly prepared by atom transfer radical polymerization (ATRP) in latex. The brominated SBR (SBR-Br) was prepared by the reaction between the SBR and N-bromosuccinimide (NBS), then vinyl silane grafted SBR with well-controlled branch chain was prepared by the ATRP initiated by SBR-Br. The best grafting condition was obtained, that is the reaction temperature and time were 70&#xa0;°C and 12&#xa0;h, the mass ratio of monomer: CuBr: dNbpy (4,4'-Dinonyl-2,2'-bipyridine) was 3: 0.02: 0.01. The SBR-Br and grafted SBR were characterized by ATR-FTIR and <sup>1</sup>H-NMR. The reaction kinetics study proved that the process of grafting reaction had active/controllable characteristics. The grafted yield of SBR could reach to 11.62%. The significant phase separation of grafted SBR was observed, and it also had a typical core–shell structure. The tensile strength of vinyltrimethylsilane grafted SBR were increased by 2.66 times than that of raw SBR.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Synthesis and properties of vinyl silane grafted styrene butadiene rubber through atom transfer radical polymerization in latex

  • 期刊论文

  • 发表日期：

    2025年5月31日

查看全文
  • Changjie Yin,
  • Boyu Wang,
  • Huimin Li,
  • Dezhong Yin,
  • Qiuyu Zhang

摘要

A new well controllable vinyl silane grafted styrene butadiene rubber (SBR) was firstly prepared by atom transfer radical polymerization (ATRP) in latex. The brominated SBR (SBR-Br) was prepared by the reaction between the SBR and N-bromosuccinimide (NBS), then vinyl silane grafted SBR with well-controlled branch chain was prepared by the ATRP initiated by SBR-Br. The best grafting condition was obtained, that is the reaction temperature and time were 70 °C and 12 h, the mass ratio of monomer: CuBr: dNbpy (4,4'-Dinonyl-2,2'-bipyridine) was 3: 0.02: 0.01. The SBR-Br and grafted SBR were characterized by ATR-FTIR and 1H-NMR. The reaction kinetics study proved that the process of grafting reaction had active/controllable characteristics. The grafted yield of SBR could reach to 11.62%. The significant phase separation of grafted SBR was observed, and it also had a typical core–shell structure. The tensile strength of vinyltrimethylsilane grafted SBR were increased by 2.66 times than that of raw SBR.