Scholarlink

<p>The study explores the exciting development of nanoferrite systems designed for magnetic hyperthermia applications. Nanoparticles with the formula Co<sub>1-x</sub>Cu<sub>x</sub>Fe<sub>2</sub>O<sub>4</sub> (<i>x</i> = 0.00–0.20 in increments of 0.04) were synthesized through the sol–gel method, utilizing polyvinyl alcohol as a chelating agent to facilitate precise control over particle size. The as-prepared powders were annealed at 400 ℃, 600 ℃, and 800 ℃ to examine the influence of annealing temperature on the development of domains and size-dependent magnetic properties. Structural analysis using X-ray diffraction and transmission electron microscopy revealed well-crystalline spinel structures, with particle sizes ranging from 5.6 to 8&#xa0;nm for samples annealed at 600 ℃, consistent with the crystallite sizes (from 5.5 to 8&#xa0;nm) estimated from Williamson-Hall plots. At room temperature, the specific magnetization of pristine cobalt ferrite, measured under a maximum applied magnetic field of 20 kOe, showed a significant increase from 10&#xa0;emu/g to 69.1&#xa0;emu/g with the increase in annealing temperature from 400 to 800 ℃. The observed increase in coercivity (H<sub>c</sub>) with annealing up to 600 ℃ is linked to crystal growth within the single domain region, whereas the subsequent decrease in H<sub>c</sub> at 800 ℃ is associated with the transition of particles to a multidomain state. The single domain nanoparticles, prepared by annealing at 400 ℃, with low coercivity and moderate magnetization were coated with chitosan and subjected to induction heating experiments. The coercivity of the coated nanoparticles was significantly lower compared to the uncoated nanoparticles. Among the compositions, Co<sub>0.88</sub>Cu<sub>0.12</sub>Fe<sub>2</sub>O<sub>4</sub> exhibited superior performance, demonstrating long-term water stability and the achieved high specific absorption rate (224 W/g) and intrinsic loss power (0.89 nHm<sup>2</sup>/kg) indicating that it would be an excellent candidate as a heating agent for magnetic hyperthermia applications.</p> Graphical abstract <p></p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Influence of Copper on Structure, Magnetic Properties, and Magnetic Induction Heating Response in Co–Cu Nanoferrites

  • 期刊论文

  • 发表日期：

    2025年2月25日

查看全文
  • Ramakrishna Rao Akurati,
  • Nitchal Kiran Jaladi,
  • K. Srinivasa Rao,
  • Govinda Kapusetti

摘要

The study explores the exciting development of nanoferrite systems designed for magnetic hyperthermia applications. Nanoparticles with the formula Co1-xCuxFe2O4 (x = 0.00–0.20 in increments of 0.04) were synthesized through the sol–gel method, utilizing polyvinyl alcohol as a chelating agent to facilitate precise control over particle size. The as-prepared powders were annealed at 400 ℃, 600 ℃, and 800 ℃ to examine the influence of annealing temperature on the development of domains and size-dependent magnetic properties. Structural analysis using X-ray diffraction and transmission electron microscopy revealed well-crystalline spinel structures, with particle sizes ranging from 5.6 to 8 nm for samples annealed at 600 ℃, consistent with the crystallite sizes (from 5.5 to 8 nm) estimated from Williamson-Hall plots. At room temperature, the specific magnetization of pristine cobalt ferrite, measured under a maximum applied magnetic field of 20 kOe, showed a significant increase from 10 emu/g to 69.1 emu/g with the increase in annealing temperature from 400 to 800 ℃. The observed increase in coercivity (Hc) with annealing up to 600 ℃ is linked to crystal growth within the single domain region, whereas the subsequent decrease in Hc at 800 ℃ is associated with the transition of particles to a multidomain state. The single domain nanoparticles, prepared by annealing at 400 ℃, with low coercivity and moderate magnetization were coated with chitosan and subjected to induction heating experiments. The coercivity of the coated nanoparticles was significantly lower compared to the uncoated nanoparticles. Among the compositions, Co0.88Cu0.12Fe2O4 exhibited superior performance, demonstrating long-term water stability and the achieved high specific absorption rate (224 W/g) and intrinsic loss power (0.89 nHm2/kg) indicating that it would be an excellent candidate as a heating agent for magnetic hyperthermia applications.

Graphical abstract