Scholarlink

<p>MoO<sub>3</sub>-WO<sub>3</sub>/SBA-15 was prepared by using an SBA-15 mesoporous molecular sieve as a support to load ammonium metatungstate and ammonium molybdate, and the coupled desulfurizer was characterized via XRD, N<sub>2</sub> adsorption–desorption, SEM, TEM, FTIR, XPS, NH<sub>3</sub>-TPD, and zeta potential analysis. The oxidative-adsorptive desulfurization (OADS) performance of the coupled desulfurizer was investigated using a dodecane solution containing dibenzothiophene as the model oil. MoO<sub>3</sub>-WO<sub>3</sub>/SBA-15 exhibits outstanding performance, which stems from the strong interaction between Mo<sup>6</sup>⁺ and W<sup>6</sup>⁺. This interaction enhances the electronegativity of the coupled desulfurizer and the formation of more acid sites. Consequently, the dispersal of the coupled desulfurizer in the oil is improved, and the dispersion of active components is also facilitated, which is helpful for the adsorption of sulfides. At room temperature (25&#xa0;°C), with a coupled desulfurizer amount of 2%(w), and an O/S molar ratio of 10:1, the optimal desulfurization rate achieved was 97.50%. After five cycles, the desulfurization rate remained at 80.00%, whereas the desulfurization rate after the first regeneration still reached 96.40%. The coupled desulfurizer was also applied in real diesel&#xa0;oil, and the desulfurization rate reached 91.90%. FTIR spectra and comparative tests indicated that the main active species in the desulfurizer were molybdenum peroxide and tungsten peroxide.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Boosting oxidative-adsorptive desulfurization of fuel oil by constructing a mesoporous coupled desulfurizer with bimetal of MoO3 and WO3

  • 期刊论文

  • 发表日期：

    2025年3月4日

查看全文
  • Jian Li,
  • Yuxi Liu,
  • Xiaozhu Zhou,
  • Lina Yang

摘要

MoO3-WO3/SBA-15 was prepared by using an SBA-15 mesoporous molecular sieve as a support to load ammonium metatungstate and ammonium molybdate, and the coupled desulfurizer was characterized via XRD, N2 adsorption–desorption, SEM, TEM, FTIR, XPS, NH3-TPD, and zeta potential analysis. The oxidative-adsorptive desulfurization (OADS) performance of the coupled desulfurizer was investigated using a dodecane solution containing dibenzothiophene as the model oil. MoO3-WO3/SBA-15 exhibits outstanding performance, which stems from the strong interaction between Mo6⁺ and W6⁺. This interaction enhances the electronegativity of the coupled desulfurizer and the formation of more acid sites. Consequently, the dispersal of the coupled desulfurizer in the oil is improved, and the dispersion of active components is also facilitated, which is helpful for the adsorption of sulfides. At room temperature (25 °C), with a coupled desulfurizer amount of 2%(w), and an O/S molar ratio of 10:1, the optimal desulfurization rate achieved was 97.50%. After five cycles, the desulfurization rate remained at 80.00%, whereas the desulfurization rate after the first regeneration still reached 96.40%. The coupled desulfurizer was also applied in real diesel oil, and the desulfurization rate reached 91.90%. FTIR spectra and comparative tests indicated that the main active species in the desulfurizer were molybdenum peroxide and tungsten peroxide.