Scholarlink

<p>Nitrous oxide is a potent greenhouse gas and there are ongoing efforts to reduce the environmental impact of its use in healthcare. Substantial leakage of nitrous oxide from centralized supplies has led some centers to convert to storage in point-of-care cylinders. However, these tanks may also leak if not manually closed between uses, and compliance with such closure by staff may be poor. We endeavored to quantify the leakage from these cylinders connected to an anesthesia machine, and test an engineering control to automatically reduce such leakage. We observed that an E-cylinder of nitrous oxide left open leaks at a rate of 10 mL/min, leading to pollution without clinical utility as well as wasted resources. We developed a system consisting of a valve actuator and countdown timer that was shown to be capable of automatically closing the cylinder as needed to reduce waste, obviating the need for staff to do so manually.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Anesthesia Point-of-Care Nitrous Oxide Cylinder Leakage and a Proposed Engineering Control Solution

  • 期刊论文

  • 发表日期：

    2025年10月13日

查看全文
  • David B. Wax,
  • Muoi A. Trinh

摘要

Nitrous oxide is a potent greenhouse gas and there are ongoing efforts to reduce the environmental impact of its use in healthcare. Substantial leakage of nitrous oxide from centralized supplies has led some centers to convert to storage in point-of-care cylinders. However, these tanks may also leak if not manually closed between uses, and compliance with such closure by staff may be poor. We endeavored to quantify the leakage from these cylinders connected to an anesthesia machine, and test an engineering control to automatically reduce such leakage. We observed that an E-cylinder of nitrous oxide left open leaks at a rate of 10 mL/min, leading to pollution without clinical utility as well as wasted resources. We developed a system consisting of a valve actuator and countdown timer that was shown to be capable of automatically closing the cylinder as needed to reduce waste, obviating the need for staff to do so manually.