Scholarlink

<p>Metal halide perovskite photodetectors (PDs) offer strong optoelectronic potential; however, their performance is often limited by interfacial losses and trap-mediated charge recombination. Here, we demonstrate a simple and effective lithium iodide (LiI) incorporation strategy to simultaneously regulate film microstructure, suppress trap states, and optimize charge transport in methylammonium lead iodide (MAPbI₃)-based photodetectors. The controlled introduction of Li⁺ ions markedly enhances ultraviolet–visible light absorption while preserving the intrinsic optical bandgap, leading to improved film coverage and crystalline quality. Steady-state photoluminescence measurements reveal a pronounced reduction in trap density, evidenced by a stable emission peak centered near&#xa0; ~ 770&#xa0;&#xa0;nm. As a result, the optimized devices achieve a high responsivity of 512.58&#xa0;mA W⁻<sup>1</sup> and a detectivity of 5.06 × 10<sup>11</sup> Jones. Importantly, systematic device architecture analysis reveals that photodetectors employing a single MAPbI<sub>3</sub> absorber layer exhibit superior current–voltage characteristics due to reduced interfacial resistance and more efficient charge carrier transport. This work provides clear mechanistic insight into the dual role of lithium incorporation and interface engineering, offering a scalable pathway for enhancing the performance and reliability of perovskite-based photodetectors for advanced optoelectronic applications.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Dual-face single and tandem absorber layer photodetectors based on Li-doped halide perovskite with enhanced optoelectrical properties

  • 期刊论文

  • 发表日期：

    2026年6月2日

查看全文
  • A. Imam,
  • Yakubu Sani Wudil,
  • M. A. Gondal

摘要

Metal halide perovskite photodetectors (PDs) offer strong optoelectronic potential; however, their performance is often limited by interfacial losses and trap-mediated charge recombination. Here, we demonstrate a simple and effective lithium iodide (LiI) incorporation strategy to simultaneously regulate film microstructure, suppress trap states, and optimize charge transport in methylammonium lead iodide (MAPbI₃)-based photodetectors. The controlled introduction of Li⁺ ions markedly enhances ultraviolet–visible light absorption while preserving the intrinsic optical bandgap, leading to improved film coverage and crystalline quality. Steady-state photoluminescence measurements reveal a pronounced reduction in trap density, evidenced by a stable emission peak centered near  ~ 770  nm. As a result, the optimized devices achieve a high responsivity of 512.58 mA W⁻1 and a detectivity of 5.06 × 1011 Jones. Importantly, systematic device architecture analysis reveals that photodetectors employing a single MAPbI3 absorber layer exhibit superior current–voltage characteristics due to reduced interfacial resistance and more efficient charge carrier transport. This work provides clear mechanistic insight into the dual role of lithium incorporation and interface engineering, offering a scalable pathway for enhancing the performance and reliability of perovskite-based photodetectors for advanced optoelectronic applications.