Scholarlink

<p>The efficiency of combined donor–acceptor doping of thin lead sulfide films with nickel and iodine ions using the <i>one-po</i>t approach for obtaining photosensitive lead sulfide layers PbS(I, Ni) was shown. Chemical bath deposition of the lead sulfide films from an ammonia-citrate reaction mixture with a combined additive of NH<sub>4</sub>I and NiCl<sub>2</sub> was carried. The conditions for the films deposition were preliminarily determined by analyzing ionic equilibria in an ammonia-citrate reaction mixture. Composition, morphology and structure of the synthesized layers were studied using scanning electron microscopy, energy-dispersive elemental analysis and X-ray diffraction. Non-monotonic changes of the content of the main elements Pb, S, I, and Ni in the lead sulfide films, lattice parameter, crystallographic orientation of grains, microstresses and coherent scattering regions, as well as band gap depending on the concentration of NiCl<sub>2</sub> in the reaction bath with extreme values near 1–2&#xa0;mM NiCl<sub>2</sub> were revealed. The analysis of Raman and Fourier-transform infrared transmission spectra showed the formation of diiodine pentoxide I<sub>2</sub>O<sub>5</sub>, iodate ion IO<sup>3−</sup>, and nickel oxide NiO in the PbS(I, Ni) films in addition to the PbI<sub>2</sub> phase. A 1.8-fold increase in voltage sensitivity and a 7.5-fold increase in detectivity of the PbS(I, Ni) film deposited in the presence of 0.15&#xa0;M NH<sub>4</sub>I and 2&#xa0;mM NiCl<sub>2</sub> compared to the film deposited in the presence of only 0.15&#xa0;M NH<sub>4</sub>I were found. A significant increase in voltage sensitivity and detectivity of the PbS(I, Ni) films is caused by a synergistic effect of the doping additives with the formation of photoactive phases of lead iodide and iodine and nickel oxides.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Low-temperature one-pot synthesis of nickel and iodine-doped photosensitive thin films of lead(II) sulfide

  • 期刊论文

  • 发表日期：

    2025年9月20日

查看全文
  • L. N. Maskaeva,
  • A. V. Pozdin,
  • E. V. Mostovshchikova,
  • V. F. Markov,
  • O. S. Eltsov,
  • V. I. Voronin,
  • I. V. Baklanova,
  • P. N. Mushnikov

摘要

The efficiency of combined donor–acceptor doping of thin lead sulfide films with nickel and iodine ions using the one-pot approach for obtaining photosensitive lead sulfide layers PbS(I, Ni) was shown. Chemical bath deposition of the lead sulfide films from an ammonia-citrate reaction mixture with a combined additive of NH4I and NiCl2 was carried. The conditions for the films deposition were preliminarily determined by analyzing ionic equilibria in an ammonia-citrate reaction mixture. Composition, morphology and structure of the synthesized layers were studied using scanning electron microscopy, energy-dispersive elemental analysis and X-ray diffraction. Non-monotonic changes of the content of the main elements Pb, S, I, and Ni in the lead sulfide films, lattice parameter, crystallographic orientation of grains, microstresses and coherent scattering regions, as well as band gap depending on the concentration of NiCl2 in the reaction bath with extreme values near 1–2 mM NiCl2 were revealed. The analysis of Raman and Fourier-transform infrared transmission spectra showed the formation of diiodine pentoxide I2O5, iodate ion IO3−, and nickel oxide NiO in the PbS(I, Ni) films in addition to the PbI2 phase. A 1.8-fold increase in voltage sensitivity and a 7.5-fold increase in detectivity of the PbS(I, Ni) film deposited in the presence of 0.15 M NH4I and 2 mM NiCl2 compared to the film deposited in the presence of only 0.15 M NH4I were found. A significant increase in voltage sensitivity and detectivity of the PbS(I, Ni) films is caused by a synergistic effect of the doping additives with the formation of photoactive phases of lead iodide and iodine and nickel oxides.