Scholarlink

<p>The advancement of laser detection technology has rendered single-band laser suppression materials insufficient for reducing the risk of target exposure, highlighting the urgent need for research on dual-band laser suppression materials. Currently, laser detection primarily involves the 1064&#xa0;nm or 1540&#xa0;nm laser bands, necessitating the achievement of low spectral reflectance at these two wavelengths. ErFe<sub>0.95</sub>Co<sub>0.05</sub>O<sub>3</sub> nanofibers were prepared using the electrospinning method. Utilizing the energy level transition mechanism of Er<sup>3+</sup> ions and the nanofibers’ complex three-dimensional network, low reflectances of 22.28% at 1064&#xa0;nm and 33.72% at 1540&#xa0;nm were achieved. The micro-morphology and spectral reflectance of ErFe<sub>0.95</sub>Co<sub>0.05</sub>O<sub>3</sub> nanofibers can be optimized for laser suppression performance by adjusting heat treatment processes like calcination temperature. Therefore, the research presented in this paper will contribute to the development of novel multi-band compatible laser suppression materials.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Electrospinning preparation of ErFe0.95Co0.05O3 nanofibers for dual-band laser absorption

  • 期刊论文

  • 发表日期：

    2025年6月21日

查看全文
  • Rui Liu,
  • Linghao Pan,
  • Fanqi Meng,
  • Qitu Zhang,
  • Yi Hou,
  • Lixi Wang

摘要

The advancement of laser detection technology has rendered single-band laser suppression materials insufficient for reducing the risk of target exposure, highlighting the urgent need for research on dual-band laser suppression materials. Currently, laser detection primarily involves the 1064 nm or 1540 nm laser bands, necessitating the achievement of low spectral reflectance at these two wavelengths. ErFe0.95Co0.05O3 nanofibers were prepared using the electrospinning method. Utilizing the energy level transition mechanism of Er3+ ions and the nanofibers’ complex three-dimensional network, low reflectances of 22.28% at 1064 nm and 33.72% at 1540 nm were achieved. The micro-morphology and spectral reflectance of ErFe0.95Co0.05O3 nanofibers can be optimized for laser suppression performance by adjusting heat treatment processes like calcination temperature. Therefore, the research presented in this paper will contribute to the development of novel multi-band compatible laser suppression materials.