Scholarlink

<p>P-type bottom gate (BG) microcrystalline silicon (µc-Si:H) thin-film transistors (TFTs) were fabricated utilizing intrinsic and p<sup>+</sup> µc-Si:H films grown at a low process temperature of 100&#xa0;°C via plasma-enhanced chemical vapor deposition (PECVD) technique. The study explored the impact of 10-min annealing treatment within the temperature range of 200–350&#xa0;°C on the hole mobility in both p<sup>+</sup> µc-Si:H films and BG TFTs. The as-grown p<sup>+</sup> µc-Si:H films exhibited notably high hole mobilities compared to the usual values, with further enhancement observed after annealing in air (2–3 cm<sup>2</sup>/(V&#xa0;s)). As for the field-effect mobility of p-type BG TFTs, it was within the usual range for the fresh devices. Similar to the mobility improvement in p<sup>+</sup> films, the p-type TFT mobility experienced a significant increase following annealing in air, compared to vacuum annealing. Further subjection of the TFT to annealing in air at elevated temperatures up to 350&#xa0;°C resulted in a progressive enhancement in field-effect mobility up to ⁓0.13 cm<sup>2</sup>/(V&#xa0;s). Other important consequences are the decrease in the TFT threshold voltage and the improvement in its electrical stability. These findings emphasize the importance of applying a simple and short low-temperature annealing treatment in air for advancing the p-type BG µc-Si:H TFT performance, thereby rendering them viable for CMOS applications. The mechanism underlying this positive effect of the annealing in air was investigated by the attenuated-total-reflection (ATR) Fourier transform infrared (FTIR), Ultraviolet–Visible–near infrared (UV–VIS–NIR) spectroscopies, and computer simulations of the TFT transfer characteristics.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Enhancing hole mobility in p-type thin-film transistors: the impact of annealing in air on intrinsic and p+ µc-Si:H films deposited at 100 °C

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年5月25日

查看全文
  • Tamila Anutgan,
  • Semen Dolgoborodov,
  • Antonio J. Olivares,
  • Pere Roca i Cabarrocas,
  • Mustafa Anutgan

摘要

P-type bottom gate (BG) microcrystalline silicon (µc-Si:H) thin-film transistors (TFTs) were fabricated utilizing intrinsic and p+ µc-Si:H films grown at a low process temperature of 100 °C via plasma-enhanced chemical vapor deposition (PECVD) technique. The study explored the impact of 10-min annealing treatment within the temperature range of 200–350 °C on the hole mobility in both p+ µc-Si:H films and BG TFTs. The as-grown p+ µc-Si:H films exhibited notably high hole mobilities compared to the usual values, with further enhancement observed after annealing in air (2–3 cm2/(V s)). As for the field-effect mobility of p-type BG TFTs, it was within the usual range for the fresh devices. Similar to the mobility improvement in p+ films, the p-type TFT mobility experienced a significant increase following annealing in air, compared to vacuum annealing. Further subjection of the TFT to annealing in air at elevated temperatures up to 350 °C resulted in a progressive enhancement in field-effect mobility up to ⁓0.13 cm2/(V s). Other important consequences are the decrease in the TFT threshold voltage and the improvement in its electrical stability. These findings emphasize the importance of applying a simple and short low-temperature annealing treatment in air for advancing the p-type BG µc-Si:H TFT performance, thereby rendering them viable for CMOS applications. The mechanism underlying this positive effect of the annealing in air was investigated by the attenuated-total-reflection (ATR) Fourier transform infrared (FTIR), Ultraviolet–Visible–near infrared (UV–VIS–NIR) spectroscopies, and computer simulations of the TFT transfer characteristics.