Scholarlink

<p>Solid polymer electrolytes (SPEs) are routinely regarded as potential candidates to replace conventional lithium-ion liquid electrolytes due to their high safety and energy density. Poly(ethylene oxide)/poly(vinylidene fluoride)/lithium bis(trifluoromethanesulfonyl)imide (PVDF/PEO/LiTFSi) SPEs were prepared by a one-step electrospinning process and utilized in lithium metal batteries in this study. The electrospinning process enhanced the compatibility between PEO and PVDF, and induced the <i>α</i> to <i>β</i>-phase crystalline transition of PVDF. Consequently, the continuity of the conductive phase, the solubility and the migration ability of lithium ions within the polymer matrix were improved. Compared to PEO/PVDF/LiTFSi SPE prepared by a solution casting method, the electrospun SPE exhibited superior electrochemical performances at the same composition, achieving a lithium-ion transference number of 0.64 at room temperature and 0.60 at 60&#xa0;°C. The assembled LiFePO<sub>4</sub>/SPE/Li cell shows a stable capacity of 112 mAh g<sup>−1</sup> with a retaining capacity of 105 mAh g<sup>−1</sup> after 400 cycles at the current density of 1 C at 60&#xa0;°C, and the Coulombic efficiency is 100%.</p> Graphical abstract <p></p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Electrospun PEO/PVDF blend solid polymer electrolytes with improved electrochemical performances for lithium metal batteries

  • 期刊论文

  • 发表日期：

    2025年3月5日

查看全文
  • Shanshan Gao,
  • Wenshuo Wang,
  • Haoran Xing,
  • Pengju Pan,
  • Yongzhong Bao

摘要

Solid polymer electrolytes (SPEs) are routinely regarded as potential candidates to replace conventional lithium-ion liquid electrolytes due to their high safety and energy density. Poly(ethylene oxide)/poly(vinylidene fluoride)/lithium bis(trifluoromethanesulfonyl)imide (PVDF/PEO/LiTFSi) SPEs were prepared by a one-step electrospinning process and utilized in lithium metal batteries in this study. The electrospinning process enhanced the compatibility between PEO and PVDF, and induced the α to β-phase crystalline transition of PVDF. Consequently, the continuity of the conductive phase, the solubility and the migration ability of lithium ions within the polymer matrix were improved. Compared to PEO/PVDF/LiTFSi SPE prepared by a solution casting method, the electrospun SPE exhibited superior electrochemical performances at the same composition, achieving a lithium-ion transference number of 0.64 at room temperature and 0.60 at 60 °C. The assembled LiFePO4/SPE/Li cell shows a stable capacity of 112 mAh g−1 with a retaining capacity of 105 mAh g−1 after 400 cycles at the current density of 1 C at 60 °C, and the Coulombic efficiency is 100%.

Graphical abstract