<p>Ultra-fast and highly compact optoelectronic devices are highly needed for optical communication systems. One of the primary devices used in such systems is the optical encoder. In this paper, we present a 4×2 encoder realized using a new photonic crystal (PhC) ring resonator design. The proposed encoder consists of four inputs, two outputs, and two irregular hexagonal-shaped ring resonators. The structure is formed by silicon rods surrounded by air with square lattice photonic crystal structure. The photonic band gap and performance parameters are analyzed using plane wave expansion (PWE) and finite difference time (FDTD) methods. Our simulation results demonstrate that the normalized transmission values less than <InlineEquation ID="IEq1"> <InlineMediaObject> <ImageObject Color="BlackWhite" FileRef="10825_2025_2345_Article_IEq1.gif" Format="GIF" Height="16" Rendition="HTML" Resolution="72" Type="Linedraw" Width="31" /> </InlineMediaObject> <EquationSource Format="TEX">\(25\%\)</EquationSource> <EquationSource Format="MATHML"><math> <mrow> <mn>25</mn> <mo>%</mo> </mrow> </math></EquationSource> </InlineEquation> and more significant than <InlineEquation ID="IEq2"> <InlineMediaObject> <ImageObject Color="BlackWhite" FileRef="10825_2025_2345_Article_IEq2.gif" Format="GIF" Height="16" Rendition="HTML" Resolution="72" Type="Linedraw" Width="31" /> </InlineMediaObject> <EquationSource Format="TEX">\(50\%\)</EquationSource> <EquationSource Format="MATHML"><math> <mrow> <mn>50</mn> <mo>%</mo> </mrow> </math></EquationSource> </InlineEquation> are supposed to be logic states 0 and 1, respectively. The encoder’s maximum response time, contrast ratio, and footprint are 161fs, 13,&#xa0;7dB, and <InlineEquation ID="IEq3"> <InlineMediaObject> <ImageObject Color="BlackWhite" FileRef="10825_2025_2345_Article_IEq3.gif" Format="GIF" Height="16" Rendition="HTML" Resolution="72" Type="Linedraw" Width="49" /> </InlineMediaObject> <EquationSource Format="TEX">\(204.8\upmu \)</EquationSource> <EquationSource Format="MATHML"><math> <mrow> <mn>204.8</mn> <mi mathvariant="normal">μ</mi> </mrow> </math></EquationSource> </InlineEquation>m<sup>2</sup>, respectively. Furthermore, the encoder can be used in optical systems with a bit rate of around 6.2Tbps, which is a very suitable device for high-speed networks.</p>

错误:搜索内容不能为空,请输入英文关键词
错误:关键词超出字数限制,请精简
高级检索

High data rate 4x2 photonic crystal encoder using irregular hexagon ring resonator

  • Wafa Mehrez,
  • Monia Najjar

摘要

Ultra-fast and highly compact optoelectronic devices are highly needed for optical communication systems. One of the primary devices used in such systems is the optical encoder. In this paper, we present a 4×2 encoder realized using a new photonic crystal (PhC) ring resonator design. The proposed encoder consists of four inputs, two outputs, and two irregular hexagonal-shaped ring resonators. The structure is formed by silicon rods surrounded by air with square lattice photonic crystal structure. The photonic band gap and performance parameters are analyzed using plane wave expansion (PWE) and finite difference time (FDTD) methods. Our simulation results demonstrate that the normalized transmission values less than \(25\%\) 25 % and more significant than \(50\%\) 50 % are supposed to be logic states 0 and 1, respectively. The encoder’s maximum response time, contrast ratio, and footprint are 161fs, 13, 7dB, and \(204.8\upmu \) 204.8 μ m2, respectively. Furthermore, the encoder can be used in optical systems with a bit rate of around 6.2Tbps, which is a very suitable device for high-speed networks.