Scholarlink

<p>Titanium alloy and its composite are used in advanced manufacturing and metal industries due to admirable material properties. This paper present the Taguchi optimization and tool wear in machining of titanium composite which is made from stir casting technique. The reinforcement such as boron carbide (B<sub>4</sub>C) is considered with a mixture of 6% weight proportions. Hence, it has transferred to investigation on Abrasive Water Jet Machining (AWJM) process. The desirable factors are derived from taguchi method. The optimal surface roughness was attained at water pressure of 1200&#xa0;bar, traverse speed of 50&#xa0;mm/min and standoff distance of 2&#xa0;mm. The surface roughness is mainly depending on water pressure and it is produced 90% of effect on SR.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Optimization of surface roughness in machining of titanium composite using taguchi method

  • 期刊论文

  • 发表日期：

    2025年1月23日

查看全文
  • Renugadevi Kumar,
  • Gopala Krishna M,
  • Eswaraiah Billu,
  • Anjan Kumar Reddy D,
  • Ram S

摘要

Titanium alloy and its composite are used in advanced manufacturing and metal industries due to admirable material properties. This paper present the Taguchi optimization and tool wear in machining of titanium composite which is made from stir casting technique. The reinforcement such as boron carbide (B4C) is considered with a mixture of 6% weight proportions. Hence, it has transferred to investigation on Abrasive Water Jet Machining (AWJM) process. The desirable factors are derived from taguchi method. The optimal surface roughness was attained at water pressure of 1200 bar, traverse speed of 50 mm/min and standoff distance of 2 mm. The surface roughness is mainly depending on water pressure and it is produced 90% of effect on SR.