Experimental Study on Acoustic Emission Properties and Damage Characteristics of Basalt Exposed to High Temperature Treatment

To study the damage and acoustic emission (AE) energy evolution of basalt under high temperature, a series of tests under uniaxial stress are carried out on basalt heated at 25 °C, 200 °C, 400 °C, 600 °C, 800 °C and 1000 °C. Through the comprehensive analysis of AE parameters such as absolute energy and amplitude, the AE characteristics and damage evolution laws of basalt were explored. The results show that high temperature has a significant effect on the characteristics of rock stress–strain curve. With the increase of temperature, the compaction stage of the curve becomes longer, the plasticity increases, and the peak strength of basalt decreases. The higher the heat treatment temperature, the faster the strength decreases, and the strength decreases by 63.91% at 1000 °C. The AE localization points converge from the dispersed state to the aggregated state. With the increase of temperature, the period of convergent nucleation of the AE localization sites is advanced, high amplitude AE signals shifted from a concentrated distribution near the peak stress to a discrete distribution throughout the entire process. The heat treatment of the rock has an additive effect on the burstiness. 600–800 °C can be used as the threshold temperature of basalt to transform from brittle failure to plastic failure. The high temperature effect is responsible for the transition of the AE cumulative absolute energy at 400–600 °C. The influence of high temperature on damage evolution is discussed. The initial damage increases exponentially after 800 °C. With the increase of temperature, the evolution rate of damage variable becomes faster and gradually changes from linear to nonlinear.