Scholarlink

<p>In this work, the 3D nature of stationary mixed-mode (I &amp; II) notch tip fields in shape memory alloys, initially in austenite phase, under small scale transformation and yielding conditions is studied through finite element simulations. An isotropic constitutive model which represents the combined effects of superelasticity and plasticity is employed. The effects of the above factors and temperature on the evolution of transforming and plastic zones as well as the spatial distribution of near-tip stresses, plastic strain and martensite volume fraction are analyzed. The results show that at a temperature above the austenite finish temperature, <InlineEquation ID="IEq1"> <InlineMediaObject> <ImageObject Color="BlackWhite" FileRef="10704_2024_832_Article_IEq1.gif" Format="GIF" Height="19" Rendition="HTML" Resolution="72" Type="Linedraw" Width="22" /> </InlineMediaObject> <EquationSource Format="TEX">\(A_f\)</EquationSource> <EquationSource Format="MATHML"><math> <msub> <mi>A</mi> <mi>f</mi> </msub> </math></EquationSource> </InlineEquation>, plasticity occurs before phase transformation takes place near the tip, whereas it does so only in the fully transformed martensite phase at a temperature well below <InlineEquation ID="IEq2"> <InlineMediaObject> <ImageObject Color="BlackWhite" FileRef="10704_2024_832_Article_IEq1.gif" Format="GIF" Height="19" Rendition="HTML" Resolution="72" Type="Linedraw" Width="22" /> </InlineMediaObject> <EquationSource Format="TEX">\(A_f\)</EquationSource> <EquationSource Format="MATHML"><math> <msub> <mi>A</mi> <mi>f</mi> </msub> </math></EquationSource> </InlineEquation>. By contrast, the transforming zone is much smaller at higher temperature, which is attributed to impediment caused by plastic deformation. Under mixed-mode loading, hydrostatic stress is tensile near the stretched or blunted part of the notch, and compressive close to its sharpened portion. The plastic strain and martensite volume fraction are higher at the latter side. The thickness variations of field quantities become insignificant at distances from the tip of 0.25 to 0.5 of the specimen thickness.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

A 3D numerical study of mixed-mode (I and II) stationary notch tip fields in shape memory alloys

  • 期刊论文

  • 发表日期：

    2025年1月8日

查看全文
  • Tinku Kumar Mahato,
  • R. Narasimhan

摘要

In this work, the 3D nature of stationary mixed-mode (I & II) notch tip fields in shape memory alloys, initially in austenite phase, under small scale transformation and yielding conditions is studied through finite element simulations. An isotropic constitutive model which represents the combined effects of superelasticity and plasticity is employed. The effects of the above factors and temperature on the evolution of transforming and plastic zones as well as the spatial distribution of near-tip stresses, plastic strain and martensite volume fraction are analyzed. The results show that at a temperature above the austenite finish temperature, \(A_f\) A f , plasticity occurs before phase transformation takes place near the tip, whereas it does so only in the fully transformed martensite phase at a temperature well below \(A_f\) A f . By contrast, the transforming zone is much smaller at higher temperature, which is attributed to impediment caused by plastic deformation. Under mixed-mode loading, hydrostatic stress is tensile near the stretched or blunted part of the notch, and compressive close to its sharpened portion. The plastic strain and martensite volume fraction are higher at the latter side. The thickness variations of field quantities become insignificant at distances from the tip of 0.25 to 0.5 of the specimen thickness.