Scholarlink

<p>The utilization of natural materials along with the renewable daytime radiative cooling process is the present need to encourage better sustainable development. Natural pulp has excellent radiative cooling properties but good hydrophilicity, poor adhesive strength and limited solar reflectance (which may be a severe issue for the high solar intensity zones like India). Therefore, a composite of the barium sulphate particles in cellulose pulp is developed in this study to produce the daytime radiative cooling coating with all favorable characteristics. Barium sulphate particles physically interact with the pulp, so the pulp tends to disperse more uniformly in the dimethylformamide solution in the presence of barium sulphate particles. This composite dispersion forms a stable, adhesive, smooth and environmentally friendly coating. The developed coatings' hydrophobic nature is also detected during the experiment and sliding drops of dew form on the coating. The developed coating produced a temperature drop of 4&#xa0;°C at noon and 9.1&#xa0;°C in the absence of solar irradiance. The maximum cooling power observed was 85 W/m<sup>2</sup> and the minimum cooling power of nearly 40 W/m<sup>2</sup> was recorded, corresponding to a minimum temperature drop just before noon, around 9:30—10:30 am during this experimental study.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Hydrophobic self-sustained natural cellulose-BaSO4 composite coating for efficient daytime radiative cooling

  • 期刊论文

  • 发表日期：

    2025年1月25日

查看全文
  • Jay Prakash Bijarniya,
  • Swikriti Tripathi,
  • Sudepta Bauri,
  • Jahar Sarkar,
  • Pralay Maiti

摘要

The utilization of natural materials along with the renewable daytime radiative cooling process is the present need to encourage better sustainable development. Natural pulp has excellent radiative cooling properties but good hydrophilicity, poor adhesive strength and limited solar reflectance (which may be a severe issue for the high solar intensity zones like India). Therefore, a composite of the barium sulphate particles in cellulose pulp is developed in this study to produce the daytime radiative cooling coating with all favorable characteristics. Barium sulphate particles physically interact with the pulp, so the pulp tends to disperse more uniformly in the dimethylformamide solution in the presence of barium sulphate particles. This composite dispersion forms a stable, adhesive, smooth and environmentally friendly coating. The developed coatings' hydrophobic nature is also detected during the experiment and sliding drops of dew form on the coating. The developed coating produced a temperature drop of 4 °C at noon and 9.1 °C in the absence of solar irradiance. The maximum cooling power observed was 85 W/m2 and the minimum cooling power of nearly 40 W/m2 was recorded, corresponding to a minimum temperature drop just before noon, around 9:30—10:30 am during this experimental study.