Scholarlink

<p>Nonwoven glass fiber-based filters are used to study particulate matter (PM) concentration in air. In this research, the collection of PM using filters made from bleached nanocellulose fibers known for their high aspect ratio is discussed. Elemental chlorine free bleaching followed by refining using Lab valley beater and Super masscolloider has been carried out. Refining time (20 and 60&#xa0;min) and clearance (0.4, 0.1, 0.01 and 0) between grinding stones were used as parameters to produce different grades of micro and nanocellulose fiber-based sheets. Refining using Lab valley beater yielded short-length whereas refining using Super masscolloider yielded long-length and high aspect ratio fibers at zero clearance. The imaging of fibers and sheets prepared using vacuum filtration were carried out using SEM. Viscosity studies of the refined pulp slurry confirmed the shear thinning behaviour. Tensile strength, burst strength, and porosity of sheets were measured to know the influence of refining parameters. Refined nanocellulose and commercial glass microfiber-based sheets were used as filters in dust capturing of PM<sub>2.5</sub> and PM<sub>10</sub> using dust sampler. This study reveals that micro/nanocellulose sheets obtained from Super masscolloider refining may be used an alternative to glass fiber-based sheets in capturing the fine dust (PM<sub>2.5</sub>) having low moisture.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Entrapment of PM2.5 and PM10 dust particles using bleached nanocellulose based filters processed via ultrafine grinding

  • 期刊论文

  • 发表日期：

    2025年1月8日

查看全文
  • Pallavi Gulipalli,
  • Chandra Babu Mallineni,
  • Trinath Jamma,
  • Ramesh Adusumalli

摘要

Nonwoven glass fiber-based filters are used to study particulate matter (PM) concentration in air. In this research, the collection of PM using filters made from bleached nanocellulose fibers known for their high aspect ratio is discussed. Elemental chlorine free bleaching followed by refining using Lab valley beater and Super masscolloider has been carried out. Refining time (20 and 60 min) and clearance (0.4, 0.1, 0.01 and 0) between grinding stones were used as parameters to produce different grades of micro and nanocellulose fiber-based sheets. Refining using Lab valley beater yielded short-length whereas refining using Super masscolloider yielded long-length and high aspect ratio fibers at zero clearance. The imaging of fibers and sheets prepared using vacuum filtration were carried out using SEM. Viscosity studies of the refined pulp slurry confirmed the shear thinning behaviour. Tensile strength, burst strength, and porosity of sheets were measured to know the influence of refining parameters. Refined nanocellulose and commercial glass microfiber-based sheets were used as filters in dust capturing of PM2.5 and PM10 using dust sampler. This study reveals that micro/nanocellulose sheets obtained from Super masscolloider refining may be used an alternative to glass fiber-based sheets in capturing the fine dust (PM2.5) having low moisture.