<p>The development of efficient and stable bifunctional electrocatalysts composed of Earth-abundant elements to facilitate both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in water splitting still presents considerable challenges. In this work, a ZnCoFe@NiS/NF catalyst featuring a three-dimensional spherical micro-flower structure supported on nickel foam was successfully prepared through a simple, multi-step hydrothermal synthesis method. Owing to its significantly enhanced specific surface area, abundance of active sites, and superior electron conductivity, the ZnCoFe@NiS/NF catalyst demonstrates outstanding bifunctional catalytic performance in 1&#xa0;M KOH. At a current density of 10&#xa0;mA cm<sup>− 2</sup>, the overpotential is as low as 170 mV for the OER and 178 mV for the HER. Specifically, an overall water splitting electrolyzer constructed from ZnCoFe@NiS/NF requires only a remarkably low operating voltage of 1.52&#xa0;V to achieve a current density of 10&#xa0;mA cm<sup>− 2</sup>, surpassing the performance of the majority of reported bifunctional metal sulfide electrocatalysts. Furthermore, the catalyst operates at a similarly low voltage of 1.72&#xa0;V and maintains stability for more than 100&#xa0;h at a current density of 50&#xa0;mA cm<sup>− 2</sup>. This work not only reveals the critical importance of controlling morphology and electronic properties for enhancing the kinetics of electrocatalytic reactions, but also offers a simple and effective synthetic route for the large-scale production of high-performance and highly stable overall water splitting electrocatalysts.</p> Graphical Abstract <p></p>

错误:搜索内容不能为空,请输入英文关键词
错误:关键词超出字数限制,请精简
高级检索

Constructing ZnCoFe@NiS/NF Micro-flower Structure as Highly Efficient Electrocatalysts for Overall Water Splitting

  • Shilong Zhou,
  • Dongbo Li,
  • Guo Zhang,
  • Jinglong Xing,
  • Chengqiang Ying,
  • Kai Li,
  • Yi Sun,
  • Yan Hong,
  • Yueming Li

摘要

The development of efficient and stable bifunctional electrocatalysts composed of Earth-abundant elements to facilitate both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in water splitting still presents considerable challenges. In this work, a ZnCoFe@NiS/NF catalyst featuring a three-dimensional spherical micro-flower structure supported on nickel foam was successfully prepared through a simple, multi-step hydrothermal synthesis method. Owing to its significantly enhanced specific surface area, abundance of active sites, and superior electron conductivity, the ZnCoFe@NiS/NF catalyst demonstrates outstanding bifunctional catalytic performance in 1 M KOH. At a current density of 10 mA cm− 2, the overpotential is as low as 170 mV for the OER and 178 mV for the HER. Specifically, an overall water splitting electrolyzer constructed from ZnCoFe@NiS/NF requires only a remarkably low operating voltage of 1.52 V to achieve a current density of 10 mA cm− 2, surpassing the performance of the majority of reported bifunctional metal sulfide electrocatalysts. Furthermore, the catalyst operates at a similarly low voltage of 1.72 V and maintains stability for more than 100 h at a current density of 50 mA cm− 2. This work not only reveals the critical importance of controlling morphology and electronic properties for enhancing the kinetics of electrocatalytic reactions, but also offers a simple and effective synthetic route for the large-scale production of high-performance and highly stable overall water splitting electrocatalysts.

Graphical Abstract