Scholarlink

<p>This study investigates the cyclic behavior of reinforced concrete (RC) frames infilled with autoclaved aerated concrete (AAC) blocks—a novel and environmentally friendly material—compared to traditional clay masonry infill commonly used in Egypt. In addition, the RC frames were reinforced with an advanced type of reinforcing steel designed to enhance seismic resistance. Three 2/3-scale RC frames were experimentally tested under cyclic lateral loading. Both infill types contributed approximately equally to increasing the lateral strength of the RC frame (around 60% improvement); however, the AAC infill significantly outperformed the brittle clay infill in terms of ductility enhancement. To characterize the response, trilinear and quadlinear backbone curves were developed for the clay and AAC infills, respectively. Alongside the experimental work, numerical macromodeling of the infill panel as multi-strut and single-strut macromodels using SeismoStruct and SAP2000, respectively, was conducted. Additionally, both concentrated and distributed plasticity approaches were employed to model the nonlinear behavior of the RC elements. A suitable constitutive steel model was used to numerically track the experimental hysteresis response of the steel reinforcement. The multi-strut macromodel demonstrated superior accuracy in capturing the hysteresis behavior of the infilled RC frames compared to the single-strut model. The strut width and its post-cracking degradation rate, the shear-to-axial stiffness ratio, and the strain in the infill at peak stress were key parameters influencing the accuracy of the complex multi-strut macromodel in distinguishing between the brittle behavior of clay infill and the ductile response of AAC infill.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Macromodeling and experimental investigation of RC frames infilled with clay bricks and autoclaved aerated concrete blocks under cyclic loading

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年2月10日

查看全文
  • Ahmed M. El-Kholy,
  • Huda Sayed,
  • Ibrahim M. Metwally,
  • Ayman A. Shaheen

摘要

This study investigates the cyclic behavior of reinforced concrete (RC) frames infilled with autoclaved aerated concrete (AAC) blocks—a novel and environmentally friendly material—compared to traditional clay masonry infill commonly used in Egypt. In addition, the RC frames were reinforced with an advanced type of reinforcing steel designed to enhance seismic resistance. Three 2/3-scale RC frames were experimentally tested under cyclic lateral loading. Both infill types contributed approximately equally to increasing the lateral strength of the RC frame (around 60% improvement); however, the AAC infill significantly outperformed the brittle clay infill in terms of ductility enhancement. To characterize the response, trilinear and quadlinear backbone curves were developed for the clay and AAC infills, respectively. Alongside the experimental work, numerical macromodeling of the infill panel as multi-strut and single-strut macromodels using SeismoStruct and SAP2000, respectively, was conducted. Additionally, both concentrated and distributed plasticity approaches were employed to model the nonlinear behavior of the RC elements. A suitable constitutive steel model was used to numerically track the experimental hysteresis response of the steel reinforcement. The multi-strut macromodel demonstrated superior accuracy in capturing the hysteresis behavior of the infilled RC frames compared to the single-strut model. The strut width and its post-cracking degradation rate, the shear-to-axial stiffness ratio, and the strain in the infill at peak stress were key parameters influencing the accuracy of the complex multi-strut macromodel in distinguishing between the brittle behavior of clay infill and the ductile response of AAC infill.