Scholarlink

<p>A design idea for single-component metamaterial plates is proposed to achieve the thermal stability of flexural wave bandgap by the perforated and pre-curved patterns. The band structure analysis suggests that perforation can release part of the in-plane thermal expansion to weaken the softening effect of thermal stress. Introducing pre-curved components to the perforated structure will stop the decrement of the bandgap frequency in thermal environment, and even make the frequency higher with appropriate structural parameters. The bending stiffness of the heated plate is enhanced by the thermal deflection induced stiffening effect of the pre-curved components. The segmented pre-curved component presents a strong ability to resist the thermal influence on the flexural wave bandgap. A simplified model is established for the local structure of the pre-curved component. The theoretical calculations explain the thermally induced frequency increment of the bandgap and the discrepancy in the thermal response between the two pre-curved models. The transmittance of flexural wave validates the effectiveness of the proposed design.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Thermal stability design for flexural wave bandgap of metamaterial plates with perforated and pre-curved patterns

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年2月28日

查看全文
  • Qian Geng,
  • Xing Zhou,
  • Mengyang Wang,
  • Xiongwei Yang,
  • Zhushan Shao,
  • Yueming Li

摘要

A design idea for single-component metamaterial plates is proposed to achieve the thermal stability of flexural wave bandgap by the perforated and pre-curved patterns. The band structure analysis suggests that perforation can release part of the in-plane thermal expansion to weaken the softening effect of thermal stress. Introducing pre-curved components to the perforated structure will stop the decrement of the bandgap frequency in thermal environment, and even make the frequency higher with appropriate structural parameters. The bending stiffness of the heated plate is enhanced by the thermal deflection induced stiffening effect of the pre-curved components. The segmented pre-curved component presents a strong ability to resist the thermal influence on the flexural wave bandgap. A simplified model is established for the local structure of the pre-curved component. The theoretical calculations explain the thermally induced frequency increment of the bandgap and the discrepancy in the thermal response between the two pre-curved models. The transmittance of flexural wave validates the effectiveness of the proposed design.