Scholarlink

Purpose <p>Inflatable penile prosthesis (IPP) implantation is a well-established treatment for erectile dysfunction. A comprehensive understanding of the mechanical interactions between the IPP and penile tissues is crucial for improving surgical outcomes and device performance. This study aims to develop and validate preclinical testbeds, including a polymer-based benchtop model and a finite element (FE) model, to replicate the biomechanical behaviour of penile tissues during IPP inflation.</p> Methods <p>A polymer-based benchtop model was developed using porous and non-porous polyvinyl alcohol (PVA) hydrogels, with the porous PVA mimicking the spongy corpus cavernosum (CC) and the non-porous PVA representing the tunica albuginea and fascial layers. IPP inflation tests were conducted on three benchtop models and three human penile tissue segments. Additionally, 3D FE simulations of IPP inflation were performed on both the benchtop and human tissue models for comparative analysis.</p> Results <p>The experimental results demonstrated strong agreement between the human penile tissues, the benchtop model, and the FE simulations, validating the preclinical testbeds. Parametric studies using the FE model revealed that CC layer size and stiffness significantly influence IPP inflation mechanics, highlighting the importance of these factors in device performance. These validated preclinical testbeds provide a robust platform for optimising IPP design, guiding surgical procedures, and mitigating associated&#xa0;post-implantation complications.</p> Conclusion <p>The developed benchtop and FE models effectively replicate human penile tissue responses to IPP inflation and can serve as valuable preclinical tools for device manufacturers and clinicians. Their use may enhance surgical decision-making and improve long-term IPP outcomes.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Urological benchtop and in silico models validated by human penile tissue inflation tests

  • 期刊论文

  • 发表日期：

    2025年10月9日

查看全文
  • Majid Akbarzadeh Khorshidi,
  • Shirsha Bose,
  • Brian Watschke,
  • Evania Mareena,
  • Thomas Sinnott,
  • Caitríona Lally

摘要

Purpose

Inflatable penile prosthesis (IPP) implantation is a well-established treatment for erectile dysfunction. A comprehensive understanding of the mechanical interactions between the IPP and penile tissues is crucial for improving surgical outcomes and device performance. This study aims to develop and validate preclinical testbeds, including a polymer-based benchtop model and a finite element (FE) model, to replicate the biomechanical behaviour of penile tissues during IPP inflation.

Methods

A polymer-based benchtop model was developed using porous and non-porous polyvinyl alcohol (PVA) hydrogels, with the porous PVA mimicking the spongy corpus cavernosum (CC) and the non-porous PVA representing the tunica albuginea and fascial layers. IPP inflation tests were conducted on three benchtop models and three human penile tissue segments. Additionally, 3D FE simulations of IPP inflation were performed on both the benchtop and human tissue models for comparative analysis.

Results

The experimental results demonstrated strong agreement between the human penile tissues, the benchtop model, and the FE simulations, validating the preclinical testbeds. Parametric studies using the FE model revealed that CC layer size and stiffness significantly influence IPP inflation mechanics, highlighting the importance of these factors in device performance. These validated preclinical testbeds provide a robust platform for optimising IPP design, guiding surgical procedures, and mitigating associated post-implantation complications.

Conclusion

The developed benchtop and FE models effectively replicate human penile tissue responses to IPP inflation and can serve as valuable preclinical tools for device manufacturers and clinicians. Their use may enhance surgical decision-making and improve long-term IPP outcomes.