Scholarlink

<p>With modern wind turbines facing continuous upscaling in terms of size and power, challenges in manufacturing, logistics, assembly, and total cost arise. To account for these challenges, an increase in the power density, e.g., of the drive train, is required. While modifications of the component geometry allow for potential optimization, significant potential is currently locked up by safety factors accounting for uncertainty in local material properties. To unlock this potential, the uncertainty of local material properties, especially the local fatigue strength, needs to be reduced.</p><p>This study presents an experimental approach to analyze and quantify the local fatigue strength of a&#xa0;cast component by testing specimens manufactured from hollow drill samples taken from the cast component. Therefore, the change in temperature due to internal dissipation effects is observed during fatigue testing of the specimen in a&#xa0;load increase test. Analysis of the stress dependent change in temperature results in virtual test points that can be evaluated to derive local fatigue strengths. The temperature change within the specimen is determined by low-cost Negative Temperature Coefficient (NTC) thermistors placed on the surface of the specimen.</p><p>The potential of the method is demonstrated for cast iron grade EN-GJS-500-14. The testing of different casts of EN-GJS-500-14 demonstrates the robustness of uncertainty estimation of the proposed method. Especially for heavy-section castings, this procedure allows for the determination of a&#xa0;component specific local material fatigue strength without an effect on the overall component integrity. Implementing this testing procedure as a&#xa0;fingerprint of a&#xa0;cast component could reduce the uncertainty in the local material properties and consequently reduce the applied safety factors.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Component specific fatigue strength determination using hollow drill samples for limit state design in drive train components

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年2月19日

查看全文
  • Felix Weber,
  • Vitali Züch,
  • Victoria Schulz,
  • Dennis Bosse,
  • Georg Jacobs,
  • Christoph Broeckmann

摘要

With modern wind turbines facing continuous upscaling in terms of size and power, challenges in manufacturing, logistics, assembly, and total cost arise. To account for these challenges, an increase in the power density, e.g., of the drive train, is required. While modifications of the component geometry allow for potential optimization, significant potential is currently locked up by safety factors accounting for uncertainty in local material properties. To unlock this potential, the uncertainty of local material properties, especially the local fatigue strength, needs to be reduced.

This study presents an experimental approach to analyze and quantify the local fatigue strength of a cast component by testing specimens manufactured from hollow drill samples taken from the cast component. Therefore, the change in temperature due to internal dissipation effects is observed during fatigue testing of the specimen in a load increase test. Analysis of the stress dependent change in temperature results in virtual test points that can be evaluated to derive local fatigue strengths. The temperature change within the specimen is determined by low-cost Negative Temperature Coefficient (NTC) thermistors placed on the surface of the specimen.

The potential of the method is demonstrated for cast iron grade EN-GJS-500-14. The testing of different casts of EN-GJS-500-14 demonstrates the robustness of uncertainty estimation of the proposed method. Especially for heavy-section castings, this procedure allows for the determination of a component specific local material fatigue strength without an effect on the overall component integrity. Implementing this testing procedure as a fingerprint of a cast component could reduce the uncertainty in the local material properties and consequently reduce the applied safety factors.