A 3D nonlinear viscoelastic–viscoplastic constitutive model for dynamic response of an epoxy resin

A three-dimensional viscoelastic-viscoplastic constitutive model is presented for predicting the dynamic mechanical behavior of an epoxy resin at low-to-medium strain rates. The model utilizes the generalized Maxwell model, incorporating two Maxwell elements in parallel with a nonlinear spring to represent the viscoelastic response at low and medium strain rates. By utilizing an empirical logarithmic relationship to predict the material properties at different strain rates, a nonlinear exponential relation based on overstress concepts is proposed for modeling the viscoplastic behavior. Comparing the tensile and shear stress–strain curves predicted by the proposed model with the experimentally measured curves, a good agreement is observed. Implementing the viscoelastic-viscoplastic model in commercial finite element software, a three-dimensional numerical discretization is performed. Through simulations of stress-relaxation and loading–unloading tests at various strain rates using the proposed material model, relaxation and hysteresis responses are analyzed. The model successfully predicts the experimentally measured hysteresis response of a specific epoxy resin during the loading cycle, consistent with other nonlinear viscoelastic models. This material model not only well replicates the nonlinear viscoelastic responses below the yield strain but also captures plastic nonlinearities at different strain rates.