Scholarlink

<p>A&#xa0;signal tag was successfully designed by means of two-step reduction approach, in which CuNi nanoparticles (CuNi NPs) uniformly distributed on the surface of multiwall carbon nanotubes (MWCNTs). This composites not only inherits excellent conductivity and surface area of MWCNTs, but also endows the material with superior electrocatalytic performance due to the introduction of CuNi NPs. Then, a ratiometric sensing platform coupled with built-in correction ability for convenient direct determination of chloramphenicol (CAP) was exploited, wherein Cu@Ni/MWCNTs were used as signal label and ferrocene (Fc) as internal reference. It is noteworthy that ratiometric measurement was performed by directly incorporating Fc into the electrolyte solution. The profound investigation into the sensing performance of the implemented sensor revealed that Cu@Ni/MWCNTs nanocomposites exhibit satisfactory electrocatalytic activity and stability. Additionally, the integration of the ratiometric strategy markedly enhanced the reliability and repeatability and exhibited decent performance in CAP determination varying from 0.1 to 10&#xa0;μM. Overall, the corporation of Cu@Ni/MWCNTs with excellent electrocatalytic ability as well as elaborated ratiometric method makes it a valuable tool for future assaying an extensive range of substances.</p> Graphical Abstract <p></p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

A ratiometric electrochemical sensor based on Cu@Ni/MWCNTs for detection of chloramphenicol

  • 期刊论文

  • 发表日期：

    2025年3月11日

查看全文
  • Xiaoxue Liu,
  • Dongyang Wang,
  • Rongxuan Xu,
  • Xing Gao,
  • Mingyang Han,
  • Yurong Guo,
  • Lei Yu

摘要

A signal tag was successfully designed by means of two-step reduction approach, in which CuNi nanoparticles (CuNi NPs) uniformly distributed on the surface of multiwall carbon nanotubes (MWCNTs). This composites not only inherits excellent conductivity and surface area of MWCNTs, but also endows the material with superior electrocatalytic performance due to the introduction of CuNi NPs. Then, a ratiometric sensing platform coupled with built-in correction ability for convenient direct determination of chloramphenicol (CAP) was exploited, wherein Cu@Ni/MWCNTs were used as signal label and ferrocene (Fc) as internal reference. It is noteworthy that ratiometric measurement was performed by directly incorporating Fc into the electrolyte solution. The profound investigation into the sensing performance of the implemented sensor revealed that Cu@Ni/MWCNTs nanocomposites exhibit satisfactory electrocatalytic activity and stability. Additionally, the integration of the ratiometric strategy markedly enhanced the reliability and repeatability and exhibited decent performance in CAP determination varying from 0.1 to 10 μM. Overall, the corporation of Cu@Ni/MWCNTs with excellent electrocatalytic ability as well as elaborated ratiometric method makes it a valuable tool for future assaying an extensive range of substances.

Graphical Abstract