Wall pressure control of a 3D cavity with lateral apertures and wall proximity

Flows over cavities are relevant to many branches of engineering and are known to be a source of instabilities, high-pressure disturbances, and large recirculating regions, leading to excessive pressure loads. In this paper, we study the dynamical behavior of a 6.44:1 length-to-depth transitional cavity flow (i.e., where the shear layer partly enters the cavity) with wall proximity and lateral apertures. Mitigation of pressure loads is investigated through steady blowing upstream of the cavity’s leading edge. Concurrent pressure and particle image velocimetry (PIV) measurements along with companion unsteady numerical simulations have been performed to identify the mechanisms underlying the flow dynamics of both baseline and controlled cases. Experiments are reproduced numerically using the Improved Delayed Detached Eddy Simulations (IDDES) approach with shear stress transport eddy viscosity model ( \(k-\omega\) $k-\omega$ SST) at a Reynolds number of \(Re=2.8 \times 10^5\) $Re=2.8\times {10}^5$ . Results underline that steady blowing changes the flow drastically upstream of the cavity by thickening the boundary layer and reducing the flow rate passing the cavity. The controlled flow transforms the dynamics of the cavity shear layer, impacting the inner cavity flow, and leads to a significant reduction of the pressure loads. This mitigation is associated with a strong reduction in turbulent momentum at the shear layers interface.