Scholarlink

<p>Tungsten disulfide (WS<sub>2</sub>) has an important attention owing to its layer-dependent unique properties. In the monolayer form, it is easily grown via chemical vapor deposition (CVD). The morphological and structural properties could be importantly moderated via CVD growth parameters. In the present study, we report a methodology for the fabrication of high-quality WS<sub>2</sub> monolayers using a single-zone CVD system. The primary objective of the work is to investigate the effect of CVD experimental process parameters on the lateral size, morphology, and crystal quality of WS<sub>2</sub> monolayers. The topographic, structural, and optical properties of WS<sub>2</sub> monolayer were investigated by optical microscopy (OM), atomic force microscopy (AFM), scanning electron microscopy (SEM), Raman spectroscopy, and photoluminescence (PL). In the present study, the best CVD growth parameters for the better crystallinity and bigger lateral size were determined to be a WO₃ precursor amount of 5&#xa0;mg WO₃, an Ar carrier a gas flow of 25 sccm, a growth temperature of 850&#xa0;°C, a growth time of 4&#xa0;min, and a distance of the sulfur source to the furnace centre of 18.5&#xa0;cm. As a result of CVD parameter optimization, the large-lateral-sized monolayer WS<sub>2</sub> material with a lateral length of ~ 80&#xa0;µm was easily and cheaply deposited. As it is well known, device applications of such materials are severely limited by the inability to produce high-quality and large size. Our results show that the improved surface integrity of optimized monolayer WS₂ flakes holds promise for device fabrication.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

A facile synthesis of WS2 monolayers via chemical vapour deposition

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年3月30日

查看全文
  • B. A. Küçük,
  • M. Aygün Çağlar,
  • G. Turgut

摘要

Tungsten disulfide (WS2) has an important attention owing to its layer-dependent unique properties. In the monolayer form, it is easily grown via chemical vapor deposition (CVD). The morphological and structural properties could be importantly moderated via CVD growth parameters. In the present study, we report a methodology for the fabrication of high-quality WS2 monolayers using a single-zone CVD system. The primary objective of the work is to investigate the effect of CVD experimental process parameters on the lateral size, morphology, and crystal quality of WS2 monolayers. The topographic, structural, and optical properties of WS2 monolayer were investigated by optical microscopy (OM), atomic force microscopy (AFM), scanning electron microscopy (SEM), Raman spectroscopy, and photoluminescence (PL). In the present study, the best CVD growth parameters for the better crystallinity and bigger lateral size were determined to be a WO₃ precursor amount of 5 mg WO₃, an Ar carrier a gas flow of 25 sccm, a growth temperature of 850 °C, a growth time of 4 min, and a distance of the sulfur source to the furnace centre of 18.5 cm. As a result of CVD parameter optimization, the large-lateral-sized monolayer WS2 material with a lateral length of ~ 80 µm was easily and cheaply deposited. As it is well known, device applications of such materials are severely limited by the inability to produce high-quality and large size. Our results show that the improved surface integrity of optimized monolayer WS₂ flakes holds promise for device fabrication.