<p>In the current study, the demand for highly sensitive radiation dosimeters is increasing, prompting the exploration of novel materials for thermoluminescence dosimetry (TLD). This research investigates the potential of MgSO<sub>4</sub>:Dy<sub>2</sub>O<sub>3</sub> powders as new TLDs, comparing their performance against the commercial dosimeter TLD-100. The samples were prepared: (MgSO<sub>4</sub>)<sub>1-x</sub>(Dy<sub>2</sub>O<sub>3</sub>)<sub>x</sub> with x = 0.01, 0.05, 0.1, 0.5. These samples were synthesized using thermal treatment at temperatures of 600–1000 °C for 6, 8 h. The samples were characterized to assess crystallization using X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), and energy dispersive X-ray (EDX) spectroscopy and mapping. Fourier transform infrared (FTIR) and raman spectroscopy were employed to verify the physicochemical composition and vibrational characteristics of the thermoluminescent (TL) materials. Optimization and dosimetric evaluations were conducted using X-ray irradiation at low doses, followed by readout with a Harshaw TLD-3500 reader. The XRD patterns confirmed the crystalline nature of the powders. Dosimetric capabilities were assessed by exposing the prepared samples to 2.97 mGy of X-ray radiation for ten cycles. The samples MSD0.5, optimized at 900 °C for 6 h in powder form, exhibited the highest sensitivity and dose response, with TLD readings of 458.95 nC, compared with 213.45 nC for TLD-100. The significant increase in sensitivity, along with stable time temperature profile (TTP) settings, suggests improved accuracy, positioning these materials as promising candidates for high performance radiation dosimetry in both environmental monitoring and medical applications.</p>

错误:搜索内容不能为空,请输入英文关键词
错误:关键词超出字数限制,请精简
高级检索

Optimization of time temperature profiles for thermoluminescence glow curve analysis of MgSO4:Dy2O3 powder in TLD applications

  • Hayder Salah Naeem,
  • Iskandar Shahrim Mustafa,
  • N. N. Yusof,
  • M. I. Sayyed,
  • Ammar Nadal Shareef,
  • Alghareeb Abbas Abdulhussein Mohammed,
  • Ali Q. Tuama,
  • Thair Hussein Khazaalah,
  • Nabasu Seth Ezra,
  • Oke Aduragbemi Olaoluwa,
  • Munirah Jamil,
  • G. I. Efenji,
  • Muhammad Fadhirul Izwan bin Abdul Malik

摘要

In the current study, the demand for highly sensitive radiation dosimeters is increasing, prompting the exploration of novel materials for thermoluminescence dosimetry (TLD). This research investigates the potential of MgSO4:Dy2O3 powders as new TLDs, comparing their performance against the commercial dosimeter TLD-100. The samples were prepared: (MgSO4)1-x(Dy2O3)x with x = 0.01, 0.05, 0.1, 0.5. These samples were synthesized using thermal treatment at temperatures of 600–1000 °C for 6, 8 h. The samples were characterized to assess crystallization using X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), and energy dispersive X-ray (EDX) spectroscopy and mapping. Fourier transform infrared (FTIR) and raman spectroscopy were employed to verify the physicochemical composition and vibrational characteristics of the thermoluminescent (TL) materials. Optimization and dosimetric evaluations were conducted using X-ray irradiation at low doses, followed by readout with a Harshaw TLD-3500 reader. The XRD patterns confirmed the crystalline nature of the powders. Dosimetric capabilities were assessed by exposing the prepared samples to 2.97 mGy of X-ray radiation for ten cycles. The samples MSD0.5, optimized at 900 °C for 6 h in powder form, exhibited the highest sensitivity and dose response, with TLD readings of 458.95 nC, compared with 213.45 nC for TLD-100. The significant increase in sensitivity, along with stable time temperature profile (TTP) settings, suggests improved accuracy, positioning these materials as promising candidates for high performance radiation dosimetry in both environmental monitoring and medical applications.