Scholarlink

<p>The growing industrial demand for high-productivity welding solutions for thick sections has stimulated the development of hybrid arc processes capable of combining high deposition rates with enhanced penetration. In this context, the present study investigates the serial Plasma-GMAW hybrid process with emphasis on its operational behavior, parameter mapping, and applicability to thick steel joints. A systematic experimental program was conducted by varying plasma current and plasma gas flow while maintaining constant GMAW parameters. Process behavior was analyzed through electrical signal monitoring, high-speed imaging, and macrographic evaluation of weld bead geometry, including penetration depth, bead width, and reinforcement characteristics. The results indicated two distinct operating regimes of the plasma arc. Under lower plasma energy levels, a melt-in mode was observed, promoting improved bead wettability and stable weld pool behavior. At higher plasma energy levels, a keyhole mode developed, producing a significant increase in penetration, with strong sensitivity to plasma gas flow rate. Excessive plasma pressure, however, led to weld pool instability and burn-through conditions. Based on the mapped parameter window, circumferential welding trials on 12.7&#xa0;mm thick steel pipes demonstrated full penetration in a single pass at a travel speed of 60&#xa0;cm/min with limited joint preparation. Under the evaluated conditions, the process also showed productivity potential when compared with reference SAW procedures. The findings demonstrate that the serial Plasma-GMAW process is a promising alternative for thick-section fabrication from an operational and productivity standpoint. Further studies involving microstructural characterization and mechanical performance are recommended for full industrial qualification.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Operational characterization of the serial plasma-GMAW hybrid process for thick-section welding

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2026年5月12日

查看全文
  • Junior Bonetti Zanini,
  • Daniel Galeazzi,
  • Cleber Marques,
  • Régis Henrique Gonçalves e Silva

摘要

The growing industrial demand for high-productivity welding solutions for thick sections has stimulated the development of hybrid arc processes capable of combining high deposition rates with enhanced penetration. In this context, the present study investigates the serial Plasma-GMAW hybrid process with emphasis on its operational behavior, parameter mapping, and applicability to thick steel joints. A systematic experimental program was conducted by varying plasma current and plasma gas flow while maintaining constant GMAW parameters. Process behavior was analyzed through electrical signal monitoring, high-speed imaging, and macrographic evaluation of weld bead geometry, including penetration depth, bead width, and reinforcement characteristics. The results indicated two distinct operating regimes of the plasma arc. Under lower plasma energy levels, a melt-in mode was observed, promoting improved bead wettability and stable weld pool behavior. At higher plasma energy levels, a keyhole mode developed, producing a significant increase in penetration, with strong sensitivity to plasma gas flow rate. Excessive plasma pressure, however, led to weld pool instability and burn-through conditions. Based on the mapped parameter window, circumferential welding trials on 12.7 mm thick steel pipes demonstrated full penetration in a single pass at a travel speed of 60 cm/min with limited joint preparation. Under the evaluated conditions, the process also showed productivity potential when compared with reference SAW procedures. The findings demonstrate that the serial Plasma-GMAW process is a promising alternative for thick-section fabrication from an operational and productivity standpoint. Further studies involving microstructural characterization and mechanical performance are recommended for full industrial qualification.