Scholarlink

<p>In this study, an efficient grinding process technology with inclined symmetrical twin grinding-wheels design is proposed for the grinding of tungsten carbide inspection microprobes for detection circuits on printed circuit boards (PCBs). The inclined twin high-speed spindles are equipped with individual boronous polycrystalline composite diamond grinding-wheel so that the tapering and the tip-arc of precision microprobe can be fast generated through the symmetrical bilateral grinding design and circular interpolation movement track planning. To keep the twin grinding-wheels sharp, electric-discharge in situ dressing (EDID) technique is proposed, where the grinding-wheels need no loading, unloading nor calibration. A multiple resistance–capacitance (mRC) relaxation power source provides the discharge source for in-situ dressing of the twin grinding-wheels, thus creating adequate, highly consistent grinding edges and chip pockets. Also proposed are two self-adaptive strategies, grinding force feedback and spindle vibration detection, to improve grinding efficiency and prevent deterioration during grinding. Experimental results indicate that under the following conditions: wheel grain size of 25&#xa0;μm, wheel speed of 30,000&#xa0;rpm, workpiece speed of 500&#xa0;rpm, pecking feed rate of 1.3&#xa0;mm/min, and grinding depth of 10&#xa0;μm/stroke, grinding time to create a probe is 2.8&#xa0;min and 1.9&#xa0;min in non-self-adaptive and self-adaptive modes, respectively. Grinding efficiency improves by 32% with surface roughness at Ra 0.206&#xa0;µm. Compared to manual grinding (30&#xa0;min/probe), grinding efficiency is improved by a factor of 15. After dressing the twin grinding-wheels once, up 46 probes grinding (average service life) can be achieved, which have commercial potential.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Advanced high-precision grinding method with an inclined symmetrical twin grinding-wheels design for machining tungsten carbide microprobes

  • 期刊论文

  • 出版模式：

    开放获取

  • 发表日期：

    2025年9月25日

查看全文
  • Shun-Tong Chen,
  • Chia-Hao Lien

摘要

In this study, an efficient grinding process technology with inclined symmetrical twin grinding-wheels design is proposed for the grinding of tungsten carbide inspection microprobes for detection circuits on printed circuit boards (PCBs). The inclined twin high-speed spindles are equipped with individual boronous polycrystalline composite diamond grinding-wheel so that the tapering and the tip-arc of precision microprobe can be fast generated through the symmetrical bilateral grinding design and circular interpolation movement track planning. To keep the twin grinding-wheels sharp, electric-discharge in situ dressing (EDID) technique is proposed, where the grinding-wheels need no loading, unloading nor calibration. A multiple resistance–capacitance (mRC) relaxation power source provides the discharge source for in-situ dressing of the twin grinding-wheels, thus creating adequate, highly consistent grinding edges and chip pockets. Also proposed are two self-adaptive strategies, grinding force feedback and spindle vibration detection, to improve grinding efficiency and prevent deterioration during grinding. Experimental results indicate that under the following conditions: wheel grain size of 25 μm, wheel speed of 30,000 rpm, workpiece speed of 500 rpm, pecking feed rate of 1.3 mm/min, and grinding depth of 10 μm/stroke, grinding time to create a probe is 2.8 min and 1.9 min in non-self-adaptive and self-adaptive modes, respectively. Grinding efficiency improves by 32% with surface roughness at Ra 0.206 µm. Compared to manual grinding (30 min/probe), grinding efficiency is improved by a factor of 15. After dressing the twin grinding-wheels once, up 46 probes grinding (average service life) can be achieved, which have commercial potential.