Scholarlink

<p>In order to investigate the relationship between temperature distribution and shape control for thin medium plates, based on the production of a 3800-mm finishing mill, a high-precision temperature field prediction model of the rolled piece was established using the control volume heat balance method. The model was used to calculate the temperature field in the thickness, width, and length directions of the piece, and the results were used to analyze its effect on the shape control. By comparing the calculated results with the measured data, it can be seen that the deviation of the calculated results of this model was within 1%. Firstly, considering the big temperature difference in the thickness direction of the piece, an optimization coefficient of each pass for rolling force calculation was proposed to improve the accuracy. Secondly, the influence of the temperature difference in the width direction on the wedge shape of the piece was quantitatively analyzed, and the control standard of the temperature difference within 20&#xa0;°C was proposed. Thirdly, the influence of the temperature difference in the length direction on the shape control of the piece was quantitatively analyzed, and the tail edge wave problem was solved by increasing the rolling temperature and limiting the length of the piece. The above research has been applied in production, and the shape quality for different specifications plates has been improved.</p>

错误：搜索内容不能为空，请输入英文关键词
错误：关键词超出字数限制，请精简
高级检索

Three-dimensional temperature field distribution of thin medium plate during finishing rolling and its effect on shape control

  • 期刊论文

  • 发表日期：

    2025年1月27日

查看全文
  • Weishi Ma,
  • Hongbo Li,
  • Ning Kong,
  • Zhilong Zheng,
  • Hao Yu,
  • Kai Mu

摘要

In order to investigate the relationship between temperature distribution and shape control for thin medium plates, based on the production of a 3800-mm finishing mill, a high-precision temperature field prediction model of the rolled piece was established using the control volume heat balance method. The model was used to calculate the temperature field in the thickness, width, and length directions of the piece, and the results were used to analyze its effect on the shape control. By comparing the calculated results with the measured data, it can be seen that the deviation of the calculated results of this model was within 1%. Firstly, considering the big temperature difference in the thickness direction of the piece, an optimization coefficient of each pass for rolling force calculation was proposed to improve the accuracy. Secondly, the influence of the temperature difference in the width direction on the wedge shape of the piece was quantitatively analyzed, and the control standard of the temperature difference within 20 °C was proposed. Thirdly, the influence of the temperature difference in the length direction on the shape control of the piece was quantitatively analyzed, and the tail edge wave problem was solved by increasing the rolling temperature and limiting the length of the piece. The above research has been applied in production, and the shape quality for different specifications plates has been improved.